Hello to all DIYers!
In everyday life, we all often have to use various extension cords. Moreover, if for street conditions or summer cottage Basically, extension cords with a long cable are used, several tens of meters long, but for indoors (sheds, garages, workshops or at home), extension cords with a block of three or four sockets and a wire length of 3 to 5 are most often used. 7 meters.
However, the problem is that not all manufacturers make canopy holes on the back wall of their extension cords, thanks to which they can be hung on the wall.
For example, on this extension cord there are such canopies.
I found a simple way out of this situation by doing this on many of my extension cords: wooden awnings from small planks.
Moreover, making such a canopy is quite simple.
To do this, you will need the following materials:
First, from one end of the blank board, in the center, you need to drill a through hole like this, using a feather drill for wood.
So using extension cords with such awnings is very convenient!
Well, that's all for me! Goodbye everyone and good luck in the new year!
Modern housing consists of many communications, where electrical wires occupy a leading place. They connect not only numerous light sources, but also all equipment, from household to digital. Such an abundance of cable can create an unattractive picture, and if there are small children in the house, it can also be dangerous. To avoid any troubles, when planning a renovation, you must immediately determine where and how to hide the wires in the apartment. Let's look at the most common options that are very popular.
When we're talking about about major repairs, it is best to hide all communications so that they do not spoil the aesthetic appearance.
This technology can be used when wallpaper is already hung on the wall. To do this, you need to follow a simple algorithm of actions:
No less popular is the placement of wires on the floor, or rather under it. So simple, but at the same time in an original way, you can quickly disguise the wires. Once you choose this option, you have several options.
You can even hide the wires on the ceiling, and it will be easier to do this than with a wall. There are also several options here:
If you don’t want to disturb the created interior and add more work to yourself, then you can use no less interesting ways camouflage.
Tree branch. Even a small but extra piece of cable can be easily decorated. To do this, a tree branch is formed, which is decorated with homemade leaves, flowers and birds. An original idea will update the interior and enliven the room.
Trees. If the length of the excess wire is too long, then do not rush and cut it. It will be enough to buy special fasteners, look on the Internet for a suitable silhouette and form it on the wall.
Scenery. More complex options can also be considered. So you can “draw” on the wall original panel. The main thing is a clear contrast that will highlight the idea.
Art object. Since we are talking about electricity, we can do original design ceiling in the form of a giant light bulb. This design is fixed to the ceiling.
Power station. To decorative element performed several functions at the same time, you can depict a simple power plant on the wall, with the help of which parents can teach their children the basics and principle of operation of the power plant.
Highway. The process is more complex and painstaking, and will also require free time and desire. To create an interesting piece of furniture, you need to cut out all the components from cardboard and, if desired, paint them to create a colorful object. You can purchase special blanks. This way you can easily disguise the wires from the TV.
Fence. Any wires can be secured to the top of the baseboard. But in order to disguise them, you can cut out small blanks in the form of a fence, which is fixed to the baseboard using double-sided tape. This is an original idea for a children's room, and the fence can be painted in different colors or one specific one.
In addition, communications can be easily hidden behind the following items:
The largest number of cords are located around the computer desk. Here, in addition to the computer itself, there may be other devices that require connection to the mains. All this leads to the presence of not only tangled wires, but also carriers. To decorate them, just use your imagination:
If necessary, you can implement the most unusual and extraordinary ideas for masking wires in the apartment.
stroysvoimirukami.ru
Cables and wires, at least most of them, are located in approximately one corner and rarely move. Nevertheless, the computer wires gathered in thick balls under the table, the eternal “noodles” behind the TV, constantly get under your feet, make it difficult to clean, or even completely fall out of the connectors at the most inopportune moment.
How to hide the wires and secure them at the same time? Try using construction ties for this: they can be disposable, they cannot be removed without cutting them, and they can be reusable. They cost pennies, but they can be used to assemble wires into bundles and attach them to the wall.
**highlight: The soul strives for beauty even in the prosaic theme of seeing off? Buy decorative ties! Leaf Ties similar to leaves can be ordered online. Similar “Wire Blooms Cable Clips” will make it possible to fix the cable to the wall.
The name of this large office clip is not familiar to everyone, nor is its other side. It can not only hold papers, but also become a good ally in the fight against wires.
Use them to secure wires to a table or wall, and remove them whenever you want in one motion. Secure them on the table and thread a USB cable or any other cable you use frequently through them, and they will never get lost or crawl away.
It is convenient to tighten the wires with special Velcro, the same as on clothing. You can buy them or make them yourself; you can find materials for them in a craft store.
There are many options for hiding wires that move one way or another, but what to do with those that lie in one place almost all the time?
In this case, you need to buy a cable channel; often in construction stores they are sold combined with baseboards. They will perfectly hide several wires, even if they are quite thick.
Although they also have a disadvantage - they must be installed after first getting rid of the old baseboards, and the wire installed in them cannot be easily removed. Fortunately, there are alternative solutions.
This decorative fence is convenient, looks great and is easy to make. All you need is plywood (thick cardboard or plastic will also work), double-sided tape and cutting tools.
Chargers and power supplies from various gadgets cause no less trouble in the house. Every year their number grows, and sometimes finding the right charger takes as much time as the process of charging the battery.
A charging box will help you forget about this and no longer meditate over a tangle of tangled wires while removing the necessary charger from it.
The field for creativity here is huge - only your imagination and... fire safety can limit you. Yes, you shouldn’t neglect this parameter and try to fit all 15 power supplies into a small box: they can overheat and cause a fire, so don’t skimp on space in the “charging incubator.”
Inside the box is an extension cord for several inputs. It takes a couple of minutes to do this, but then you can charge several devices at once without cluttering the table. A shoe box works well as a base.
There is another option - sew a holder for chargers. Design and quantity seats, again, only your imagination determines.
A “single” bag for charging a smartphone made of fabric and similar with increased rigidity (the shape of a lotion bottle, lined with fabric).
When you put all the wires on the table and near household appliances in perfect order, it will not hurt to know how to store the wires. It could be a lawn mower cord, love. New Year's garland, or even headphones, which tend to get confused with phenomenal tenacity.
The wiring harness can be inserted into a cardboard paper towel tube or toilet paper. Each one should be labeled and stored in a large box without fear of them getting tangled. Instead of such tubes, you can use pipe insulation (sold in hardware stores).
The headphones can be wrapped around an old bank card, and the garland can be wrapped around a large piece of cardboard.
We deliberately placed this method of taming wires at the end, since it includes all the previous ones. How to connect wires so that you forget about them for a long time? Make them one with the furniture! Read how to fix bad smell ourselves.
For example, the order in the wires under computer desk can be aimed by fixing the extension cord, electrical and signal wires “upside down” or vertically. You don’t need any special skills for this, just self-tapping screws and a screwdriver are enough. And if you don’t want to spoil the furniture, pay attention to the various Velcro clips, of which there are many in hardware stores.
By following these simple tips, you can tidy up your wires in no time, while showing off your creativity. Read: How to do it yourself decorative candles– 10 ideas.
Also read
Comments
style-beauti.com
During the construction of a house, electrical wiring is installed in a hidden way, under the plaster. Complete replacement electrical wiring, as a rule, is produced during overhaul. In this case, grooves are made in the wall, into which the wire is laid.
But what to do when there is no opportunity or desire to engage in dusty wall slitting? Or do you need to connect a recently installed powerful electrical appliance, such as a water heater? In this case, many choose open method laying of electrical wiring, and fastening to the wall is carried out using a cable channel.
Several criteria are used to classify a cable channel:
Note! In terms of color design, the cable channel most often has a neutral white color, suitable for any decoration. Models that imitate a wooden structure are also popular.
The main advantage of cable channel for open wiring– this is ease of installation. At the same time, the structure can be fixed on any surface: wall, floor or ceiling. Greater value has a surface material: the method of best fastening depends on this. Let's consider the main installation options, as well as the types of surfaces to which the channel cable is attached.
Before you begin to attach the cable channel, you need to make markings on the surface: the location of the electrical wiring boxes is marked on the wall. This can be done with a pencil or chalk and a building level. It is important to maintain horizontal and vertical lines, since after installation the unevenness of the gasket will be evident.
To secure the box to a wooden wall, use ordinary self-tapping screws. The recommended length is 2-3 cm. This method is suitable for wooden houses, baths and other buildings. Self-tapping screws are also suitable for walls covered with wooden clapboard.
When performing installation, holes are pre-drilled in the bottom of the box, into which self-tapping screws are then screwed. IN plastic structures holes can be made directly with a self-tapping screw when fastening. Optimal distance between installation points is 30–50 cm, depending on the expected load on the cable channel (the number of electrical wires placed in the box).
Installing cable ducts on a concrete surface requires a more serious approach and additional tools. This will require plastic dowels and a hammer drill or impact drill to make the holes in concrete wall. This method is suitable for installing any profile: both metal and plastic, in interior spaces or outside the building. The order of work is as follows:
To secure the electrical wiring box to a concrete surface, you can also use dowel nails, which are driven in with a hammer. But this option has a significant disadvantage - if it is necessary to move the structure, certain problems arise with dismantling such dowels.
Another option for securing a cable channel is to use it for fixing assembly adhesive. Most often, the adhesive composition “liquid nails”, produced under the Moment brand, is used for these purposes. This glue is available in tubes for a mounting gun or in ordinary tubes for manual application.
The adhesive installation method is used for attaching cable channels to plasterboard, PVC wall cladding (plastic lining or panels), as well as in bathrooms on ceramic tiles. It is worth noting that only plastic wiring boxes are suitable for this method, since their weight is minimal. It is also desirable that the number of wires laid in the cable channel be minimal and do not create significant loads on the structure.
The technology of the adhesive fixation method is as follows:
After the adhesive has completely set, additional fixation is performed in problem areas. For fastening, use small screws or hammer nails.
To facilitate profile connection, use those offered by the manufacturer additional elements: T-shaped and corner structures, strip connectors, various bends and other accessories.
To install sockets and switches, it is best to use overhead versions of these products or use box models with built-in structures.
Separately, we note that the installation of external electrical wiring is carried out last, after all finishing works.
voltland.ru
Wires are laid different ways. Or they make a groove in the wall and lay an electrical wire there. Can be placed on top of plaster, but not on top paper wallpaper. They secure it with special brackets bought in a store, or by cutting metal plates, nailing them, placing a wire on them and tightening the ends. Wiring is often placed in beautiful cable channels so that they do not spoil the appearance of the room.
If the wire is stationary and does not involve periodic movement, then it is better and safer in a cable channel. These are plastic boxes made from low-burning materials, having both a neutral white color and many others - like wood, Ivory etc. In such a box, the cable does not break or get pressed, and the maintainability of the entire network increases.
They used to drive a nail, but those days are gone. In places where wire is sold, special fasteners for wires are available for sale. They are selected based on the thickness of the wire and look approximately as follows
Very easy - just stick it on! You can even use wallpaper glue! And if it is not available - your own saliva, after eating eggs or even oatmeal! Eat a bowl of oatmeal (or pearl barley - it doesn’t matter), then generously moisten the wire and the wall with your saliva and calmly stick the wire to the wall - if your saliva is not viscous enough, you can drive a nail or use a hammer drill, the main thing is to choose the right time to pin the wire to the wall! The most effective time is after midnight and certainly in the waxing Moon Phase! Calmly, without nervousness, turn on the hammer drill (you don’t have to slobber on it) and, having estimated the position of the wire, as you please, push it into the wall! The main thing is not to make a mistake in the Moon Phase! Otherwise, the wire may stick in fragments and fall off the next day! And this is a completely different story! 🙂
In addition to all these methods, you can use regular nails 20 millimeters long. Otherwise, hammer in half the path of nails along which you want to lay the cable. Using pliers, bend them 90 degrees. Hold the cable and drive the nails into the top one at a time. The result will be fastening in the form of staples.
Wires and cables can be attached to the wall with special wire fasteners, but this will not look very neat.
A more civilized way is to lay the wire in cable channels that are attached to the wall and only then the wire is laid in them.
There are several ways to secure the wire to the wall. It all depends on the purpose of this fastener, permanent or temporary, on the purpose of the wiring being laid, on the requirements for it appearance. If the wire is attached to a concrete or brick wall, it is best to use cable channels, the choice of which in the store is very large, the most different sizes. They also have special corners, adapters or plugs, like for baseboards. It looks aesthetically pleasing and is quick to install. The cable channel is attached to the dowel-nails using a hammer drill, after about 40-50 centimeters. For wooden wall there are more options, these are the same cable channels, plastic clamps shown in the earlier answer, homemade clamps made of tin (they are first cut into thin strips, then nailed to the wall along the cable route, and then lay the cable and clamp the clamp on both sides), special retro porcelain insulators, which used to be found in every home, but now they have become a vintage piece of furniture. Often they try to hide the wire in plastic skirting boards if they run along the wall.
info-4all.ru
Every person strives for perfection. Trying to create something beautiful around himself. Sets up his home. Tries to make it warm and cozy. Carrying out repair work, creating beautiful interior, arranges furniture and equips the room with equipment. The operation of modern technology is impossible without wires. Television, electrical and Internet wires often stretch along the perimeter of the entire room, thereby causing a lot of trouble. Owners often stumble over them. In addition to making life difficult, they also greatly spoil the design of the room. What to do in this situation and how to remove the wires in the apartment that get tangled under your feet?
An easy and common way to remove wires in an apartment is to hide them in the floor plinth. Its main feature is that it contains a space intended for laying wires. You can buy it at the market or at any construction supermarket. The plinth is attached to the wall using self-tapping screws and dowels.
Cables stretched along the wall are hidden in the plastic channels of the baseboard. Floor skirting boards there are different colors and sizes. Therefore, you can easily choose the right baseboard, which will allow you to hide all communications in it, and at the same time look nice.
After laying the existing wires, the channel cavity is closed with a special decorative strip. This method is distinguished by its reliability and cable protection is guaranteed from animals that like to scratch and chew everything.
Another method will help you hide wires in the floor. When conducting construction work leveling the floor using a screed. The wires are bundled into a special sleeve and filled cement mortar. When hardened, the cords are conveniently hidden underneath.
When carrying out repair work, the wires are deepened into the wall. This is done with a grinder. Two grooves are cut into the wall, after which a part of the plaster between them is knocked out with a hammer drill. This creates a groove. All communications are laid in it and covered with alabaster. It dries quickly and holds them in place. The same applies to the places where the sockets will be located.
How to remove the wires on the wall after completing the repair? Boxes will solve the problem. You need to attach them to the wall with glue or screw them, and then insert the cable into them and slam the lid.
If the socket is located close to the door or you do not know how to remove the wires lying in the doorway, then door trims are used to disguise the cable. It is necessary to remove them and place the wires there and put them back.
You can easily remove wires in your apartment using hanging or stretch ceiling. A metal, wooden or plastic frame is specially made and fixed under the ceiling.
The cables are assembled into a bundle and laid inside the frame or on top of it.
To keep the wires together, you can use insulating tape or plastic clamps. If there are few wires, use a plastic sleeve. Then tension or suspended ceiling will hide everything. But if you cannot remove the wires yourself, you can contact trusted professionals and they will help you.
You can cover the wires in other simple ways. With the help of furniture. If there is a lot of furniture in the room, you can arrange it so as to hide the wires as much as possible. At the same time, nothing changes radically, and the room after such a rearrangement will look different.
Availability of a personal computer and org in the house. technology, implies large cluster wires at the table.
The right solution would be to purchase a special plastic box for cables. It fits wires and extension cords perfectly. When buying a simple box, you can hide it under the table, but if it is bright, use it as a decorative addition.
If you wish, you don’t have to hide the wires at all. You just need to include a little imagination and ingenuity. And the interior design of the room will change beyond recognition.
Do not rush to cut the length of the wire. Its size can serve for creative ideas. Creating an ornament, pattern, bird, dragonfly. Cords can be hidden by using climbing plants. Throw a twig along the cable and the wire will turn into a decorative element. It will look beautiful, and the presence of fresh flowers will refresh and add coziness to the room.
Decorative staples are also sold. They are somewhat different from simple ones in their appearance. Decorated with birds, flowers and all kinds of figures. With their help, you can make a tree from ordinary wire, with a bird sitting on it, or a flower, with a beautiful butterfly.
If such staples cannot be found on sale, you can use them instead vinyl stickers. With their help, create a composition and the cable will become part of it.
Using the advice of the article on the site, everyone will be able to choose for themselves an acceptable method through which they can achieve results. And the problem of how to remove the wires in the apartment will disappear forever.
The increase in the number of devices for which it is necessary to install a connection point inside an industrial or residential building has led to the development of many ways to attach the cable to the wall, both at the construction stage and in a long-term and firmly inhabited room. IN different situations you have to choose how to mount the wires on the wall so that they do not spoil the interior with their appearance, comply with electrical safety rules, and are protected from external influences environment and accidental damage. A significant aspect is the rational consumption of material and cost savings.
The need to attach the wire to the wall is first considered from the point of view of the expected service life. Power cables coming from wire distribution boxes are intended for long-term use. Communication lines and television connections are of a temporary type, capable of changing their position if necessary.
Based on this, there are 2 types of laying electrical communications:
If the hidden laying of the wire is made in corrugated or smooth pipes, then subsequent rapid installation is possible in these areas.
Example of installation in smooth PVC pipes shown in a series of photos:
In technical rooms, such wiring may remain uncovered by a layer of plaster; in residential apartments, it is located under a layer of finishing.
Precast concrete factories even produce special types of panels with built-in slabs and designed output points to connection boxes.
Another factor influencing the choice of methods for attaching the cable to the wall will be its design and materials of manufacture.
Load-bearing and internal walls of the building are erected in the following options:
In each specific case, it is necessary to decide which fastener to use for the selected type of wiring.
Diagram and method of how to secure the cable to brick wall, are selected based on the available tools and materials. As a rule, masonry is not left without a protective coating of plaster, so the wiring will be closed type.
If the volume of work is large, you will need a hammer drill and an angle grinder for leveling. Short sections can be completed by hand with a chisel and hammer.
An example of wiring on a brick wall is visible in the photo:
You can reliably fix the connection of the wires to the wall in simple ways, which do not require the expense of special fasteners: quick-drying mortar (alabaster, plaster, glue), wire to driven nails/screws, strips of tin + nails. The main condition is reliable fastening without the possibility of displacement or sagging.
After the cable installation is completed, the channels will be. To prevent them from affecting the monolithic structure of the applied mortar, the recesses are covered with a reinforcing mesh.
The wires are attached to the concrete wall with dowels using mounting gun or manually drilling holes for installing a plastic sleeve, to which a fixing bracket or clamp is screwed with a screw.
A version of what the plastic fastener looks like is shown in the photo:
Depending on the diameter of the cable (bundle of wires), staples, perforated metal tape of industrial production and home-made are also used as fasteners.
The use of a mounting gun on various types of cable and corrugated concrete fastenings is demonstrated in the video:
Monolithic concrete surfaces No, the wires are fastened on trays, in pipes or using corrugations. The wiring can remain open, be mounted inside the wall during its construction, or be hidden under the finishing trim. Sometimes, to simplify the work, channels are cut into the slabs permanent formwork, but such a solution leads to a violation of the uniformity of the thermal insulation protection of the house in places where the polystyrene foam board material is removed.
The feed-through Ø of various standardized products allows you to select the material in which the appropriate number of supply wires can be laid. The characteristics of corrugated PVC pipes for laying power networks are presented in the table:
Before installing the corrugation according to the design diagram in the self-leveling wall, you need to thread a soft wire into it, so that later you can easily insert the wires. If you need to lay several cables in one tube, diverging in different sides in intermediate fittings (tees, elbows, crosses), then thread the required number of wires in directions, and the corresponding ends are marked in different colors (paint, colored electrical tape).
If such preparation for pulling the soft core is not made in advance, then you will have to use a cable (approximately Ø 3 mm), which confidently passes into the pipe at a distance of 3 - 4 m. The end of the cable must be closed with soldering or a round nozzle so that it does not fluff up in the narrow corrugation , did not get stuck, did not damage it when feeding forward with scrolling.
In conditions that do not require a strict aesthetic approach, in technical rooms for reliable protection external wiring uses a more rigid metal hose connecting distribution boxes (also metal). The principle of attaching it to the wall is no different from the plastic corrugation and is shown in the diagram:
In all cases (pipe, corrugation, metal hose), it is important to firmly fix the cable exit into the connectors of the attached box at an angle of 90°, so the first fastening is placed at a distance of no more than 10 cm.
Depending on the brand of wire and the material in which it will be installed, the wire mount on interior wall may have different designs.
In sufficiently strong plaster, when there is no need to attach the corrugation, you can drill holes and hammer in staples - dowels with a wire pre-inserted in them. An example of such fasteners is visible in the photo:
On surfaces made of wood, pressed from sawdust slabs, various types of staples and clamps are installed (as on concrete monoliths), in which screws and nails act as fasteners. Installation is carried out quickly by hand, and a construction gun replaces an electric screwdriver.
Thin wires for the Internet and telephone can be attached to the tree. This is a special screw that is partially screwed into the wall, and a thin conductor is screwed onto the protruding part in a knot.
For soft bases such as gypsum board sheets, plastic staples and clips are used, which are simply nailed with small nails. The fastest way in this case will be to use special U-shaped staples and a construction stapler. Such brackets are designed for quick installation of wires and have plastic stops so as not to crush the current-carrying conductor.
Hide the wiring in the apartment using plastic skirting boards, which have internal cavities covered with a decorative lid. All that remains is to mount the baseboard and make exit points to the sockets.
A popular cable fastening method that combines ease of installation open wiring and not conspicuous for viewing of a closed type, are plastic cable channels. A bundle of wires in a box covered with a lid is always available for inspection and switching changes. The channel is attached to the walls with screws, the conductors inside it with plastic ties.
Boxes and distribution boxes for them are available in different sizes; you can always choose the appropriate brand for a specific network diagram. In appearance, such boxes on the walls of an office or home have become familiar and do not cause discomfort in the perception of the situation.
|
Click on the picture to enlarge. A Japanese company has come up with a great solution to getting rid of charger cables scattered all over the floor: it has created a rubber-coated SocketDeer socket with deer antlers attached to it! On these horns you can put, for example, mobile phone and plug its “charger” into an outlet. The cable can be wrapped around the horns so that it does not hang down to the floor.
An excellent solution for travelers, the Belkin Mini Surge tee allows you to take one USB “charger” with you on the road instead of several. In addition, this device provides you with additional power outlets and surge protection, whether you are in a hotel room or at the airport. Mini Surge is equipped with three regular outlets and two USB ports through which you can charge different devices. Mini Surge can rotate 360 degrees around its axis, allowing it to be conveniently placed in any work environment without blocking other outlets. Woofy
The price of this plastic dog is simply beyond belief! However, if you're looking for a clever way to store your cables, Woofy might be of interest to you. The cables are hidden in the “belly” of this almost half-meter dog, and extend from its hind legs.
On October 9, 2008, a video appeared on the DL.TV website in which an anonymous viewer from Seattle boasts of his incredible invention: a wireless office. You can watch the video. All cables are routed inside PVC boxes that form the outline of the table and go to the socket in the wall. There are no wires either above or below the table. Serious DIY project.
40 cm plastic box performs the same function as Woofy, but costs only $29.50. Of course, it is not as original as a $250 plastic dog, but inside this box you can hide a whole extension cord with all the dangling cables.
Can't plug two power supplies side by side? The situation can be corrected using a rotating wall socket. It will take you 10 minutes to set this position, but then you will be able to plug into the socket two bulky “chargers” that did not fit anywhere else, since you can fix them at an angle, and not directly on top of each other. Sometimes extra centimeters can make a big difference.
Such sockets are not yet available, but the idea is worthy of attention. How many times do you pull the plug from an outlet (to save energy, free up space, or temporarily plug in another device) and throw it on the floor where the cords get tangled and everyone trips over them? After all, it's not safe. The solution is obvious: you just need to hang unused plugs on the holders of the sockets themselves. I hope these sockets go on sale soon!
Some of the products featured in this review are a little strange, but the SocketSense is a truly practical product. How convenient it is, instead of a regular extension cord, to use a model that can be extended (from 33 to 41 cm) to suit any fork configuration. For some users, the most important thing will be how this surge protector looks - completely ordinary, with six slots.
If SocketSense looks like a completely normal upgrade to a standard surge protector, designed to allow you to connect more “chargers” custom size, then PowerSquid looks strange. But this makes a lot of sense. PowerSquid glows in the dark blue so that under the table you can see where to connect the plugs. Thanks to flat shape it can be hidden behind furniture. PowerSquid also protects your phone line. And most importantly: all sockets are placed on separate flexible wires, so they do not interfere with each other.
The author of this idea has not yet found a manufacturer who would undertake to bring this project to life. The idea is to stretch the wires along the baseboard, but instead of attaching them to the wall, you can hide them behind a decorative fence: the cables are not visible, but at the same time they are easily accessible.
Charging base for the whole family. Kangaroom will make sure that you always know where your phone, camera and other devices are: the Kangaroom splitter is hidden in a special box, which is mounted on the wall in a visible place. If your phone is in this charging base, then you will never lose either your phone or its charger. |
Unfortunately, wireless technologies have not yet become widespread in offices and homes. This means that the pile of annoying wires on the desk won’t go away anytime soon. Here are a few tips to help you get rid of clutter and hide cables from prying eyes.
In contact with
Classmates
1. Hide the extension cord from chargers in a box 
4. Keep all necessary wires at hand 
