Acrylic bathtubs are in great demand due to their hygiene and lack of corrosion on their surface. But acrylic has its drawbacks, primarily the requirement for careful care. How to clean acrylic bath at home, worries many housewives. Caring for it can be called a whole science. If you care for your bathtub correctly, it will delight you with its snow-white color for a long time.
Detergents for cast iron will not work here. You should not choose a cleaning product for acrylic bathtubs that contains:
Acrylic tanks cannot be washed with boiling water or products containing ammonia, formaldehyde and other corrosive elements. This will damage the surface, and restoring it is quite expensive. You need to choose high-quality products that will be completely safe for the surface, while cleaning it quickly and easily.
Let's consider which reliable detergent you can choose and why:
Now you know how to clean an acrylic surface, but how to clean an acrylic bathtub at home is also worth finding out.
They must be used strictly following the instructions. With abrasives, everything is simple - apply and wash until the bathtub finally shines. But gentle gels are usually used as follows::
Such baths require careful treatment. For example, you should not wash them more than twice a week with acrylic bathtub cleaner. After each use, you need to rinse the walls with water and wipe with a sponge. Several times a week you need to wipe with soapy water and then wipe dry with a dry soft cloth.
Not even a drop of water should remain, otherwise the washing tank will not be covered yellow coating . But this material is not subject to corrosion - this is a definite plus. If plaque does form, it should be washed off with other cleaning agents.
They will cost you less, and besides, you will not doubt their composition. Therefore, many housewives resort to this type of care for their acrylic bathtub at home.
Cleaning the bathtub is very simple using regular wine vinegar, diluting it with water. The mixture is safe, but its effect is no worse than that of expensive drugs. But this composition only copes with soap stains; if the surface has already turned yellow, then try another option:
Often, rusty stains from flowing water remain on the side of the bathtub. Acrylic does not rust; plaque remains from the running faucet, so its condition must be monitored and changed in a timely manner. It's easier than getting rid of rust. But if it was not possible to prevent its occurrence in time, then you can also resort to traditional methods. For example, the following rust remover will help::
City water contains rust and various salts, which is why the bathtub often turns yellow. Another effective method of combating yellowness is table vinegar paired with oxalic acid. Warm the water slightly and add these two components to it. Wipe yellow stains with this mixture and wash them off after ten to twenty minutes.
If the acrylic is high quality, it can last thirty years while remaining looking like new. But this effect will only occur with careful use. It is not allowed in an acrylic container.:
If you follow a weekly washing schedule and avoid damage, she will be fine. Before installation new bath plumbers advise changing and water pipes to avoid the appearance of yellow is worn. And although the smooth surface is not susceptible to corrosion and attacks of fungal diseases, disinfection must be carried out once a year.
For disinfection, you can use the Czech product Ravak Disinfectant, which is distinguished by its quality and safety. This way you will have no doubt that the container is disinfected and you can bathe in it yourself or bathe small children there. The product is very easy to use:
At the facility economical consumption, because frequent disinfection of the acrylic surface is not required. But with its help you can treat the entire bathroom. The main rule is to dilute it generously with water!
Of course, you will have to use trial and error to find the only cleaning product that will completely suit you in terms of quality and safety, and will not repel you with an unpleasant pungent odor. But if it is not possible to buy expensive bottles of chemicals, you can always resort to traditional methods, which are also famous for their effectiveness.
Each product has its own advantages and disadvantages, directly related to its composition. Optimal composition it is simply impossible to name. The main thing is not to forget to make sure that the composition does not contain acids, ammonia and chlorine, which are contraindicated for acrylic surfaces.
If you regularly keep your bathroom clean, then no plaque or rust will form there. After all, bathing in a snow-white container is much more pleasant than in a yellow and unkempt bath. Therefore, twice a week, always pay attention to the surface of the acrylic, rinsing it with jets of water and a sponge, and then wiping off any remaining droplets.
Attention, TODAY only!
Over time, the appearance of yellowish streaks on their surface is inevitable. It's all the private's fault tap water. The impurities of chlorine and heavy metals it contains have a detrimental effect even on high-tech products. Therefore, periodic removal of yellowness will not only restore a hygienic appearance, but will also significantly increase the service life of plumbing fixtures.
Bathroom cleanliness
The desire to use household chemicals recognizable brands, often does not meet consumer expectations.
Moreover, such products contain a high concentration of brutal chemical compounds, the incorrect use of which leads to irreversible damage to the top coating. A worthy candidate for commercial cleaning products are household items at hand.
Available in every home, they deal with the problem of yellowish streaks on the surface of the bathtub and toilet just as professionally. The most popular, capable of quickly and perfectly eliminating yellowness, are citric acid, baking soda and vinegar.
In other options, ammonia is the auxiliary component.
Important! To avoid the brutal effect of components on the skin of the hands, when using both chemical and folk remedies you need to work with gloves.
Cleaning products
Baking soda is considered the most common cleaning agent. With a small degree of damage to the surface, using a soft lip, it is useful to rub a sufficient amount of the substance and leave for 50-60 minutes. Then rinse with warm water. In case of old yellowish stains, ammonia is added to it. Having mixed both components until a viscous mass is formed, the latter is applied to the yellowed area for 30 minutes. After time, the consistency is rinsed with water.
The soda effect will be noticeable after the first application. In this case, damage to the enamel is completely eliminated.
Vinegar is no less effective at combating the problem of yellowish streaks. In addition to cleaning, he owns a massive antiseptic. property. All you need to do is apply it to the surface of the plumbing and leave for 1 hour. Its inherent pungent odor will evenly dissipate after rinsing with water. In addition to vinegar, you can use paper napkins pre-soaked in it.
So, covering the bathtub or toilet with them an hour after flushing, the absence of contamination is guaranteed.
Citric acid can have a similar effect, which can be consumed in the following way. Two 100 gram packs are added to the hot water pre-filled in the bathroom citric acid. The solution is left in this state overnight.
In the morning, the final step of the cleaning procedure is carried out using the usual method, specifically using sponges. It is better if there are several of them, since this substance actively dissolves fat.
To ensure that the bathroom and toilet always remain clean and are not subject to mechanical damage, certain rules should be followed:
Washing powders corrode any bathroom coating.
All types of contaminants must be dealt with at the stage of their appearance. It is enough to pay proper attention to cleaning the plumbing fixtures once a week in order to forever forget about the problem of yellowish streaks.
A snow-white acrylic bathtub is a cheap and extremely attractive option that virtually everyone has considered when planning a renovation.
Acrylic plumbing looks excellent, is not subject to corrosion, but requires constant and extremely careful care.
If you follow all the tips for cleaning products made from this, even the most affordable acrylic bathtub will last a long time, maintaining its original external view.
Experienced housewives familiar with this confirm the usual, although difficult to follow rule: if you wipe the bathtub with warm water and a soft cloth after each use, you can reduce to a minimum the need for the use of household chemicals.
But maintaining a bathtub in impeccable condition is extremely difficult; you don’t always have the time and energy for daily cleaning.
When caring for an acrylic bathtub, you should keep a few basic rules in mind:
Special cleaning products can be extremely expensive. If you cannot take them all the time, use folk remedies or products with a mild chemical composition. To choose the right way to clean an acrylic bathtub, carefully study the composition;
All these inconveniences are an inevitable price to pay for the impeccable whiteness, resistance to corrosion and other advantages of acrylic.
Therefore, before purchasing, go over the daily care question in your head; if it is not cleaned correctly, the acrylic bathtub will quickly lose its “sales appearance.”
As we have already noted, the sponge must be soft. With household chemicals suitable for acrylic, everything is a little more complicated:
But it is worth keeping in mind that the cleaning product does not have to contain harsh substances such as alcohol, acetone, ammonia, and acids. Products from the Chif, Bass and almost all other brands have proven themselves to be excellent; they can be easily purchased at your local store;
This also allows you to disinfect the bath.
It is necessary to clean the bathroom frequently, once every two weeks, with a cleaning agent and, as necessary, without it. Also, once a year you need to disinfect the bathtub: take some water, add a special disinfectant suitable for acrylic, stir well and leave for 10-15 minutes. Then the surface of the bathroom must be treated with clean, warm water and a soft cloth.
An alternative option is to add one and a half liters of citric acid (7%) to the filled bath, leave for 12 hours, then rinse well with warm water and wipe with a soft cloth. This method is extremely helpful in keeping your plumbing fixtures looking good and against limescale deposits caused by very hard water.
A separate problem is how to clean an acrylic whirlpool bathtub.
It is virtually unsolvable if powerful pollution has already arisen. It is much more effective to use preventive measures: before each bath, draw water and turn on the hydromassage for a couple of minutes. Once a month, the same function must be repeated, increasing the operating time of the hydromassage to 10-15 minutes and adding a cleaning agent to the water. Then the water is combined, and the “light” maintenance procedure is repeated without introducing a cleaning agent.
This is a fairly effective way to prevent contamination of the thin tubes of the hydromassage system.
If you have a small child who takes water procedures in an ordinary bath, the question arises: how to clean an acrylic bath before bathing the baby. Folk remedies are better suited for this - ordinary soap and warm water, if the plumbing is in good condition and does not require severe reading.
Acrylic, with sufficient care, is completely safe for the baby.
There are several types of pollution that are difficult to deal with using ordinary means. This is primarily rust, limescale, scratches and stubborn stains. The strategy for keeping your home clean depends on the type and severity of the contamination.
The function should be carried out as carefully as possible, otherwise there is a risk of only aggravating the situation;
The color must be extremely accurately matched to the color of the plumbing fixtures, and purchased at a specialty market; working with watery acrylic does not present any particular difficulty.
Caring for acrylic is not the most common task even for a completely neat housewife. But almost everyone believes that the perfect appearance of the plumbing that this gives is worth all the effort. The basic rule, which should be adhered to even before equipping the bathroom: cleaning must be constant, and the household chemicals used should be treated with the utmost care.
Copying and replication of website materials is prohibited.
Acrylic bathtubs have a number of advantages, thanks to which they have taken a strong position in the plumbing market.
They are durable, lightweight, retain heat well and, with proper care, have a beautiful and discreet spring appearance. But it’s extremely gentle, so you can’t clean an acrylic bathtub with just any product. How to clean an acrylic bathtub so that it lasts a long time and looks like new? This question is worth asking immediately after the purchase, without waiting for the plumbing fixtures to turn yellow and become covered with rusty stains.
Read this article for us:
When choosing bath cleaning products, you need to carefully familiarize yourself with their composition.
All these components scratch or corrode acrylic. And in small scratches and pores dirt and bacteria constantly accumulate. Naturally, you can reduce the damage to zero, but this requires complete polishing of the bathtub, which requires a lot of time and effort.
If you are unsure whether the cleaning product is suitable, use it on small area. Small area You can quickly polish it with ordinary felt, microfiber or special wax.
Most sanitary ware care products have special markings that can help you determine if they are suitable for acrylic bathtubs.
Almost all well-known manufacturers produce a special series of gentle cleaning gels or sprays. This range will not only remove old rust stains or limestone deposits, but will also deal with bacteria.
In the instructions for use, some manufacturers also list detergents and cleaning products that are recommended to be used to care for your bathroom at home. Pay attention to the full name of the cleaning product. For example, Sif contains chlorine, and Sif-cream is a product that should be used to wash an acrylic bathtub.
There is no need to clean an acrylic bathtub from yellowness, plaque or mold if you wash it with warm water and a soft sponge after each use.
You can soap the bath after bathing with dishwashing detergent (making sure in advance that there are no contraindications), shampoo or watery soap.
Be sure to wash off the foam only with warm water, since extremely hot and cool water can have a bad effect on the integrity.
After you “wash” the bathtub, you need to carefully dry it, wiping and polishing it with a soft rag or felt.
Small scratches (not deeper than a millimeter) can be removed immediately by polishing with felt or small sandpaper. As for the deepest cracks, it is worth using watery acrylic, then polished with the same felt.
This is one of the advantages of acrylic bathtubs - scratches can be removed extremely quickly and without a trace. And it is recommended to do this as soon as possible, because dirt begins to accumulate in the cracks, which is difficult to remove. Some cleaning products are poorly washed out and can remain in cracks, which in turn can lead to irritation on the skin after another water procedure, so before washing an acrylic bathtub with a strong product, it is worth polishing the most noticeable cracks. Rinse off the cleanser with copious amounts of warm water.
Periodically, as a preventative measure, you can completely polish the bathtub using special wax. This procedure will not only help get rid of scratches, but also give the acrylic a shine. But before the procedure it is necessary to use a small sandpaper go over particularly noticeable scratches. Do not overdo it, as acrylic is extremely easy to wipe, almost right through. Such damage is also not a problem in the presence of watery acrylic: the outer side is temporarily covered with electrical tape or tape, and the recess is evenly filled with acrylic.
Some types of pollution are difficult to avoid. Eg, rust spots arise due to a loosely closed tap or a leaking pipe, and limescale is a common occurrence in apartments with hard water. But all stains can be removed either with the help of special cleaning products or traditional methods. For example, a mixture of lemon juice and vinegar in proportions of 1 to 1 will perfectly clean an acrylic bathtub from limescale and stubborn rust.
Simply wipe the stain with a soft sponge soaked in the substance.
This consistency is good not only for topical use. It can easily return the bathtub’s whiteness after the “soaking” procedure: a bathtub filled with water with the addition of a glass of vinegar and lemon juice is left to bleach for 12 hours. This “bleach” is carefully washed off with warm or cold water and polish the surface with a rag. Some recipes recommend increasing the dose of vinegar to 0.5 liters, but the method using such a consistency is considered quite solid, so it is better to start with the smallest doses and modify it by other means.
It is better to use this cleaning method no more than once every six months.
If for some reason you cannot fill the bathtub with water, then you can bleach it using ordinary napkins previously soaked in vinegar. Cover the entire surface of the bath with them and leave for 30 minutes, then remove the residue and wash with warm water.
Home » Cleaning »
Acrylic bathtubs are now on sale more often than products made of cast iron or steel.
Light weight and relatively low cost make them popular among buyers. But at the same time, acrylic is quite capricious and requires painstaking and careful care.
Modern acrylic has dirt-repellent properties. But during active use by household members, sooner or later, the bathroom becomes “overgrown” with stains, its appearance and hygiene deteriorate significantly. That’s why many housewives are thinking about the question of how to clean an acrylic bathtub at home?
The most common contaminations for such products are the following:
Before you start cleaning similar products, it is important to understand what cannot be used in such work. Unnecessary means include subsequent means and improvised
In addition, the shine will leave the surface of the acrylic, it will become matte and ugly. Abrasives include not only purchased funds, but also improvised. For example, baking soda or citric acid undiluted in water, tooth powder, etc.;
Under the influence highest temperature The surface of the bath may become deformed.
Before using one or another product to remove various types of contaminants (purchased or popular), you need to test it in an area hidden from prying eyes. This will preserve the appearance of the product, even if the cleaning composition is too aggressive.
How to clean an acrylic bathtub if you can’t buy commercial cleaners?
The most common and most suitable remedy is regular menthol. toothpaste. The composition is applied to dirty areas using a soft toothbrush and gently rubbed into the surface. After this, wash off with clean water.
Rust stains from the surface of acrylic can be removed using several traditional methods. For example:
Important! Any abrasive should be applied to the acrylic surface very carefully. Otherwise, you will have to solve another problem: how to remove scratches from the surface of the bathtub.
You can clean acrylic bathtubs from yellowish stains with products that are sold in household chemical stores.
They are designed specifically for acrylic coatings. For example, “Akrilan” or “Tim-Profi”. These compositions can restore even very neglected plumbing products to their original form. Among other things, such products will disinfect the surface. But you shouldn't abuse them. Very highest efficiency is associated with the huge variety of chemical compounds and substances in these products that harm not only the acrylic surface, but also the health of family members.
Therefore, it is enough to use them during general cleaning of the bath (1-2 times a month).
An acrylic bathtub can be cleaned of yellowness using traditional methods and available components that are used by almost all housewives. These include:
1. Table salt and wine vinegar. You must proceed as follows:
Do not overexpose the solution, otherwise it will damage the surface.
2. Citric acid. Dissolve 20 grams of lemon in one glass of water. Spread the resulting composition moderately over the surface of the product with a cloth and leave for 30-40 minutes. After this, wash with warm water. After this procedure, the bath will acquire its initial white color.
Limescale deposits on an acrylic bathtub can be removed with citric acid or vinegar. The bathtub must be filled to the top with warm water (35-40 degrees).
Pour in 0.5 liters of table vinegar or add 50 grams of lemon. Leave for 12 hours, after which drain the water and wash the bathtub with clean water.
It is better not to use these two remedies at once. Vinegar can react with baking soda and corrode the surface.
Read also: how to clean a shower head from limescale?
In modern apartments, practical and durable acrylic bathtubs are often installed, but the polymer quickly loses its appearance if not properly maintained. To maintain sparkling whiteness and prevent cracks and scratches, you need to take proper care of your acrylic bathtub.
Caring for modern plumbing differs from regular cleaning of metal and iron bathtubs.
If treated with care, acrylic products will delight their owners for at least 3-10 years. They compare favorably with old massive bathtubs in their lightness, variety of models, sparkling white coating, ability to retain heat for a long time, resistance to corrosion, and absence of mold and mildew.
Acrylic can be scratched when bathing pets. Iron buckets and basins, hard brushes and scourers will damage the polished surface. Using detergents with abrasives and chlorine also negatively affects the quality of the acrylic coating: it becomes dull and loses its attractive shine.
Attempts to clean the bathtub using gels containing solvents and ammonia will result in damage to the top layer: at first it will become cloudy, and with frequent and prolonged contact with these substances, it will become deformed.
The capricious polymer cannot even withstand soaking the laundry. Powder and stain removers used in washing are harmful to the fragile white bathtub.
Microcracks that arise as a result of improper use and maintenance are not only not aesthetically pleasing, but also contribute to the future destruction of the bathtub coating. Plastic cannot withstand high temperatures.
In order for a bathtub covered with acrylic to remain white, you need to clean it properly every day and do not neglect the prevention of contamination. The smooth surface of the polymer does not absorb dirt, so just wash it with a soft sponge and soap and rinse under running water. To ensure that drops of water dry and do not leave marks, you need to wipe the coating with a dry cloth. If there is no time for these ordinary actions, and yellowness and limescale deposits still appear on the surface of the bathtub, it is worth using products designed specifically for cleaning acrylic bathtubs.
The quality of products from recognizable manufacturers is beyond doubt:
With its help you can get rid of yellowish plaque, rust, and lime deposits.
It also forms special film, which prevents dirt from settling on the bathtub.
Liquid detergents are applied with a soft sponge, sprays are sprayed over the surface of the bath. After a certain period of time specified in the instructions for use (usually from 5 to 20 minutes), the product is washed off with water. Some gels and waters for washing acrylic bathtubs can also be used to disinfect them (for example, "Tim Pro", Ravak Disinfectant). After filling the bath with water and adding a disinfectant, you need to wait about 10 minutes, then drain the water and thoroughly wash the bowl.
For everyday cleaning, ordinary dishwashing gel is completely suitable, but with old limescale we will have to manage it with the help of gels and creams specially developed for this purpose: “Sanfor”, “Gel WC 5+”, Ravak Turbocleaner.
Some folk methods will help you wash an acrylic bathtub at home:
The bath needs to be filled with hot water and a couple of sachets of this product added. After a few hours, wash the acrylic surface with running water and wipe with a soft cloth. Cleaning with citric acid cannot be repeated often, 1-2 times a year is enough.
1 liter of product is poured into a bathtub filled with warm water. During the day, it is painstakingly washed with a soft sponge, rinsed under running water and wiped dry.
At the end of cleaning, the area to be cleaned must be thoroughly washed under running water.
Sometimes the need to remove stains from plastic arises specifically after installing plumbing fixtures or after renovations in the bathroom. To wipe off the sealant, you need to be quick. Until it hardens, you can remove it with a rag and wash the surface with detergent. If the silicone layer has already hardened, It’s better to give up trying to remove it using various solvents and acetone, unsafe for acrylic.
Dried sealant must be very carefully removed mechanically: with a blade, stationery or construction knife.
Removing primer from a polymer surface is also not easy, especially without the help of harmful chemicals like white spirit and acetone.
One option is to try to remove the stain mechanical method, after softening it. Hot water is poured into the bath and connected after a quarter of an hour. This function must be repeated several times. As a result, the primer softens a little, and you can try to scrub it off with a blade or a stationery knife.
You need to act very carefully, as the risk of destroying the plastic is very high. Acrylic may lose its shine and become dull.
Product name | Mode of application |
The method of implementation depends on the mixture of the product. It can be in the form of cream, spray and paste. The spray should be sprayed on the surface of the bath, and the cream and paste should be spread on problem areas.
It is necessary to apply the product for the amount of time indicated in the instructions, then rinse it off with plenty of water and wipe the surface dry. This product is extremely effective in cleaning your bathtub. |
|
Apply foam to the problem area and leave for a while, then wash well warm water and wipe dry. Do not allow the product to dry and do not mix it with other products. Acrilan perfectly fights against all types of plaque and mold formation, and also helps prevent their reappearance. |
|
The product is sprayed onto the bath and washed off with plenty of water after the time indicated on the package has expired. |
|
Apply the product to the surface, let it sit for seven minutes, then rinse it off with plenty of water. When using, it is better to wear rubber gloves and a face mask, as the product has a rather pungent odor. |
|
This product must be applied to the problem area and, after the time indicated on the package, rinse with water. Excellently fights soap stains, deposits and corrosion, and also prevents their reappearance. |
|
Spray or spread the product onto the acrylic coating and leave for the time indicated on the package. Then rinse well with running water. |
|
Team-Profi | Apply to the surface of the bath, after the amount of time indicated on the package, thoroughly rinse with water. The product actively fights against unpleasant odors, helps restore the shine of the bath and prevent further contamination. |
The list of household chemicals indicated in this table is far from final, because at the moment there are tens various means for the care of acrylic bathtubs.
You can find for yourself which one is best for you, but before doing this, we suggest you familiarize yourself with folk ways cleaning acrylic bathtubs.
Containers from this are made by extrusion and casting. In the first case, fiberglass is added for structural rigidity and epoxy resin, but such a bath must be installed on an iron or water-resistant wooden frame.
Cast bathtubs can be placed directly on legs, because they are essentially the most solid and strong.
This strength makes it resistant to mechanical damage, so cleaning such a container is much easier, since you don’t have to be constantly afraid of damaging it.
Caring for an acrylic bathtub is simplified by the fact that during manufacture they include additives that prevent the growth of fungus, microbes and mold on the surface. Acrylic is also not susceptible to any type of corrosion.
How to clean an acrylic bathtub? Most of the dirt can be simply washed off from the surface of the bathtub with ordinary water and a sponge without the use of cleaning agents.
Since it scratches quite easily, the products used for cleaning should not be abrasive, i.e.
The more often you clean your acrylic bathtub, the better. After all, it’s even easier to wash off small stains frequently than to try to clean and scrub away deep-seated stains later. After each use, it is recommended to rinse the bathtub with water and a mild detergent, for example watery soap, and then wipe it dry with a rag or an old towel.
Cleaning the bathtub at home is the most active substances Recommend once every 2-3 weeks. The product must be applied to the entire surface, allowed to sit for some time, and then carefully rinsed off.
To prevent yellowing from constantly dripping water on the bathtub, you need to monitor the serviceability of the taps and repair them in time.
If the surface has already turned yellow, then the rust should be cleaned with special means designed to remove it.
If the tap water is quite hard, then deposits often appear on the acrylic bathtub - the so-called aqua stone. To remove it, you can use the appropriate cleaning agents or the simplest folk methods - for example, from time to time making a weak acid solution.
If you need to disinfect a bathtub at home, the procedure is no different, you just need to add disinfectants.
It is better to care for an acrylic bathtub using mild detergents, such as those used for washing dishes.
Liquid and regular soap also works well. To clean the bathtub, you can rinse out an old bottle of shampoo or shower gel that has run out, because they traditionally still have a lot of product left on the walls. Such soft compositions can be left on the surface of the bath forever without the slightest risk of damage.
How to clean an acrylic bathtub if it has become dull and yellowed? To restore its shine, after washing it is lubricated with polishing compounds.
Powders like Pemolux, Biolan and Comet, which clean specifically due to mechanical friction, are not recommended for use.
Then the question arises: how to safely clean an acrylic bathtub? The action of watery and pasty products is more based on the chemical removal of contaminants, so they can be used without the risk of destroying the surface. But traditionally they contain substances that are quite harsh on the skin, causing irritation and allergies, so it is better to clean the bathtub while wearing rubber gloves.
So, how to clean an acrylic bathtub, if preference is given to factory-made products?
What products should definitely not be cleaned:
Knowing the features will help you choose the right tools.
Acrylic is a hard plastic formerly used in the production of dentures and now also used in the manufacture of plumbing fixtures. The first standards of such bathtubs were expensive, so a number of improvements were made that made them cheaper and more affordable. Today, two types of acrylic bathtubs are produced:
The difference between them lies in the formation of the frame, but the care is similar, since the surface is in any case made of the same thing. It is important to know what you can use to clean such bathtubs, and what you should never use.
It is not permissible to clean an acrylic bathtub with powdery substances, as over time they will cause tarnishing.
Abrasive compounds are also not applicable - constantly use watery products without alcohol, acetone and ammonia (these components will harm the structure of acrylic, which will lead to cracks and abrasions). Standards with formic acid and formaldehyde is also prohibited.
You cannot clean an acrylic bathtub with hard metal and plastic brushes, even if you select the right remedy, but if you use unsuitable tools for cleaning, you can simply damage it outer surface bathroom
Only soft fabrics are acceptable.
Cleaning an acrylic bathtub using modern products will not be particularly difficult. Manufacturing companies provide a wide selection of industrial compounds that are perfectly suitable for acrylic. Before the product is released for sale, it is constantly tested in practice, so its use will help maintain the cleanliness of the bathtub and maintain its original appearance. At the same time, the cleaning process does not take enough time and effort.
Among the more popular compositions are:
These gels should not be poured onto the bath immediately, first on a soft napkin, and only later on the surface.
Use a napkin to gently wipe off any stains and leave for 5 minutes. After this, rinse well with water and be sure to wipe with a dry cloth.
It is possible to use universally suitable products, for example, from Ravak. They are also intended for acrylic sanitary ware, and are capable of fighting not only ordinary types of dirt, but also rust or limescale. If you can’t find these compounds on sale, choose the others, but only those suitable for acrylic.
Methods proven by housewives will also help clean an acrylic bathtub.
At home, you can easily find citric acid, vinegar, laundry soap and other products that can be used perfectly in cleaning acrylic surfaces. Let's take a closer look at them in the fight against different types pollution.
To remove yellowness simply with folk remedies, for example, using bleaching compounds.
Always use water solutions with vinegar in a 1:1 ratio. Application is carried out in the same way as in the case of lemon juice. Moreover, in addition to the whitening effect, vinegar has antiseptic properties.
Hydrogen peroxide is a great way to remove corrosion from an acrylic bathtub.
It should be applied to the rusty marks with a cloth and left for 10-15 minutes, then washed off with a soapy substance.
You should not use white or bleach, as you can spoil the integrity of the acrylic or its shine.
If hydrogen peroxide or lemon juice could not dissolve the corrosion stains, then it is better to use special industrial products. Homemade recipes can only remove the freshest rust marks, but it’s better to deal with old ones differently. In addition, experts say that it is easier to prevent rust on acrylic than to try to scrub it off later.
Baking soda, vinegar and bleach are great for removing hard water deposits on an acrylic bathtub.
First, make a paste of baking soda and water and rub it on the surface of the bathtub. While the composition is working, make a solution of vinegar, water and bleach (all components one part at a time). Vinegar-bleaching agent is applied to the soda layer, after which you need to leave the solution for half an hour. Finally, just rinse everything off with water and wipe the surface with a dry cloth.
You can also soak napkins or sheets in vinegar and water. Without twisting them too much, cover the bath with them and leave for half an hour. During this time, the composition will take effect, due to which the limescale deposits will simply be washed off using the usual washing method.
A solution of soda and soap removes old plaque - combine 200 g.
first component and 100 gr. grated soap or 100 ml watery. In the first case, you need to add a small amount of water to make a paste. Apply the solution to the wet surface of the acrylic bath and leave for 20 minutes. Rinse off the composition with plain water.
VIDEO TO HELP:
Cast iron bathtubs are gradually being replaced by acrylic products. The latter are much lighter than metal ones and have a variety of shapes. Polymer containers are easier to manufacture and less material intensive. The cost is comparable to traditional plumbing and tends to get cheaper.
But, unlike the enamel coating of a cast iron bathtub, acrylic has different technical characteristics. This affects the care and methods - how to wash an acrylic bathtub at home.
Acrylic is a mixture of copolymers of acrylic and methacrylic acids embedded in the structure of synthetic fabric. Other, less famous name- plexiglass.
Properties:
The properties of the polymer affected consumer qualities washing container:
The properties of the acrylic bathtub material have made it possible to develop a number of methods for caring for and cleaning the product.
Pollution occurs for various reasons:
Depending on the type of contamination, you can clean the acrylic bathtub using simple methods or using special liquid compositions.
The simplest and affordable way for cleansing and prevention:
The method allows you to remove all surface layers. Instead of soap, you can use household chemicals - liquid solutions of detergents for dishes, plastic (windows, doors), floors.
IMPORTANT! It is necessary to use non-abrasive sponges or soft cloths. Hold the hard side of the sponge inside your hand.
ADVICE. Mud from sand, clay, Decoration Materials should be soaked for 30~40 minutes. Next, rinse off with strong water pressure from the shower hose. Remove residues with a sponge without using excessive force. This will prevent the formation of scratches on the surface of the acrylic bathtub.
Application of special detergent with an alkaline or acidic indicator is justified for cleaning an acrylic bathtub from limescale or rust stains:
IMPORTANT! Can I wash it with White? - a question from the housewives. Categorically, no! The composition includes, reacts with chemical elements acrylic The result is darkening of the surface, loss of properties.
ADVICE. Cleaning an acrylic bathtub immediately after use is incomparably easier than subsequently removing dirt.
Care for acrylic products should be periodic, including preventive measures:
The rhetorical problem of how to clean an acrylic bathtub must be solved based on the type of contamination and the timing of formation. It is important to choose the right cleaning product and method of application. Even better, do not delay the process for a long time, remove dirt immediately after using the bath.
How to wash an acrylic bathtub so that it does not change its appearance, served for a long time and pleased the eye with its unsurpassed appearance. In view of the fact that acrylic bathtubs appeared on our market quite recently, many people ask themselves the question - what products should be used to wash such bathtubs and how to handle them correctly. There are no big difficulties in the procedure of washing an acrylic bathtub. The main thing here is to follow the cleaning rules.
We are all accustomed to bulky and heavy cast iron bathtubs, and acrylic bathtubs, which are elegant in shape and quite light, at first glance seem fragile and impractical. That is why many people are wary of plumbing fixtures made of acrylic.
Unfortunately, many people still do not know the basic rules for caring for acrylic. It is worth noting that the surface of an acrylic bathtub requires more careful care and therefore you should familiarize yourself with a number of rules for caring for this material. By following basic care rules, you will be able to prolong the impeccable appearance of your bathtub.
Acrylic is a wear-resistant material. Its surface has a dirt-repellent effect, so microorganisms do not develop on it. In addition, an acrylic bathtub is not afraid of impacts, but it is easily scratched.
Features of washing an acrylic bathtub. The main thing is to be careful and careful when washing an acrylic bathtub. It is not recommended to use powdered and abrasive products, as well as pastes containing chlorine, acid, alkali, and ammonia as a cleaning product. Such substances contribute to the appearance of scratches on the surface and also lead to loss of natural color. Before you start cleaning your acrylic bathtub, always carefully read the composition of the cleaning product you are using. Do not use metal or hard brushes - such brushes will damage the integrity of the acrylic coating.
It is also not recommended to bathe your pets in an acrylic bathtub, or to place metal basins and buckets in them. Never place various objects in the bathroom - stools, metal basins and objects, as well as any other household utensils.
To properly care for an acrylic bathtub, you must use a liquid with a cleansing effect as a cleaning agent. Dishwashing detergent is perfect for this purpose. liquid soap, shower gel, etc.
If you find streaks of lime on the surface of the bathroom, it is not necessary to wash the entire container completely. Enough to take soft cloth, moisten it in lemon juice or table vinegar and wipe the surface.
If you notice that some areas of the surface of the bathroom are starting to darken, then just rinse the container with running water and wipe with a dry and soft cloth.
If problems arise in an acrylic bathtub small scratches, then its surface can be treated with a polishing material, in particular it can be ordinary mastic. Furniture polish or car polish is often used for this purpose.
Current level of development chemical industry allowed us to develop special means thanks to which an acrylic bathtub can retain its original appearance for a long time. Moreover, with such products, any acrylic container is washed quickly and safely. I would especially like to highlight such products as Akrilan, Cillit, Sarma, Acryl-Net, Star-Acrylat.
These cream-gels are specially designed for washing acrylic surfaces. The product is applied to a napkin and only then on the surface of the bath. Wipe the entire surface of the container with a napkin and leave for 5 minutes. After 5 minutes, the product should be rinsed well with warm water and wiped dry with a cloth.
You can also use universal products to clean acrylic bathtubs. The most popular universal cleaner for acrylic surfaces is considered to be a product from Ravak. It is developed according to special technology and is intended for cleaning acrylic surfaces.
To effectively get rid of rust, it is recommended to use products that are designed to combat rust specifically from acrylic surfaces.
In any case, when choosing a cleaning product for an acrylic bathtub, always give preference to special products. Such products will not only carefully clean the surface, but will also give it shine and protection in the form of a thin waterproof film. Now you already know how to wash an acrylic surface and you can provide it with proper care and increase its service life.
How to wash an acrylic bathtub - tips for washing with improvised and special means Video
Despite all their advantages, acrylic bathtubs have a significant drawback.
The low hardness of acrylic means that products made from it are very easy to scratch.
But still, if you properly and promptly care for such a bathroom, it will retain its snow-white gloss for a long time.
We will tell you how to care for an acrylic bathtub, how to do it at home.
If you ask a salesperson in a store for advice on this matter, you will probably hear about a special “unique and only possible” magic product for cleaning acrylic bathtubs at an exorbitant price. We won’t scold him, that’s his job. Let's just say that everything is much simpler.
To wash acrylic bathtubs, you can use any household detergents, with some exceptions.
Deadly enemies of acrylic bathtubs:
How to clean an acrylic bathtub at home and how to do it correctly?
An acrylic bathtub is a new alternative to traditional steel and cast iron plumbing products. Acrylic itself is a hard plastic that is used in dentistry and now in plumbing. More recently, such baths were quite expensive, but now, thanks to improvements in production, they delight with their variety and affordability.
Advantages of acrylic plumbing:
Any plumbing fixtures that come into contact with water may lose their new and beautiful appearance. The reasons for this may be the presence of limescale, yellowing areas or the formation of rust.
There are many options to fix these problems at home. However, by adhering to modern methods and using an acrylic bathtub cleaner from trusted manufacturers, you can achieve quick and high-quality results. How do you clean acrylic bathtubs?
Excellent for cleaning acrylic surfaces. It is used only in liquid form. First, the substance is applied to a soft cloth. Then, uniformly, with light movements, wipe the entire area of the bowl. After waiting a few minutes, the solution is removed with a soft sponge and rinsed with warm, running water. Wipe the bath dry with a napkin and, to create shine, treat it with a special polish.
Bass is also well suited for cleaning acrylic shower stalls.
Its advantage is versatility. Detergent cream and spray can clean not only acrylic, but also any other surface: ceramics, stone, enamel, plastic. It does not harm even delicate surfaces, since it does not contain abrasive materials. However, it has a high level of efficiency that it can easily and literally in a couple of minutes wash off rust, yellowness, limescale and grease deposits.
This version of the product is very practical because, in addition to being effective in action, it is inexpensive.
This is a foaming cleanser. Well suited for both bowls and booths. Regular use of acrylan will allow you to forget about rust, limescale and mile stains for a long time.
Suitable for delicate cleaning of acrylic areas. It effectively and sparingly removes rust, plaque, and stains. The composition is environmentally friendly and harmless. Eliminates foreign odors by forming a kind of shell on the surface, which eliminates the formation of new contaminants.
If you have an acrylic bathtub with hydromassage, Tim-Profi is the most the best remedy for cleaning. It will carefully clean all the dirt and ensure the proper operation of the mechanism for a long time.
This option is polymer-based and has antibacterial, cleansing and antifungal effects.
When cleaning acrylic bathtubs:
In principle, if you select good cleaning products that do not contain aggressive components, the acrylic surface can be cleaned quite easily and quickly. Many people have gotten into the habit of rinsing it with warm water and wiping it dry after each use of the bath.
To remove lime deposits from acrylic surfaces, you can use citric acid. To do this, you need to fill the bowl with hot water and throw a packet of ordinary citric acid into it, stir and leave for about 2 hours. After draining the water, rinse the entire area well with running water and wipe, leaving no streaks. If such cleaning is carried out once a year, then chemical and industrial products may not be needed.
Small stains on acrylic can be removed with regular toothpaste and a brush. Good cleaning is guaranteed by baking soda and soap. First, we apply these components to the dirt, and after 20 minutes, wash it off.
Limescale and rust stains can be overcome ammonia and hydrogen peroxide, mixed in equal proportions. Dip the hard side of a sponge into this mixture and wipe dirty, problem areas with it.
Fresh rust can be easily scrubbed off with baking soda. You can make a paste and apply it for 20 minutes, and then wash it off. Old rust is removed with table salt. It is applied to the stains and wiped with the hard area of the sponge.
A very dirty acrylic bowl can be cleaned using universal remedy- vinegar. A liter bottle of vinegar is poured into a bathtub filled with warm or hot water and left overnight.
Once a year bath needs to be disinfected. To do this, you need to fill the bath with water at a temperature of 20 degrees. Then add a disinfectant, for example, Rawak. Mix the product thoroughly in water and leave the solution for about 10 minutes. Next, the bath should be rinsed well and thoroughly with running water, removing any remaining substance. Such work is done carefully and with gloves. After the procedure, the bathroom room must be ventilated or ventilated.
Recent decades have brought acrylic bathtubs to the forefront in the world of plumbing. She has many positive keys, thanks to which she became a leader. And the main ones important points There is regularity and knowledge in her care. If you stick to how and what to clean, your acrylic bathtub will last for many years. Manufacturers assure that up to 35 years, an acrylic bathtub will be able to work continuously and please its owner.
Cleaning an acrylic bathtub at home: how and what to clean with, the best product
Acrylic bathtubs are very comfortable and practical. But, like any other household item, they need daily care. Any housewife who owns this simple piece of sanitary equipment has at least once asked the question “how to clean the inside of an acrylic bathtub and how often to wash it at home?” We will try to help and answer this seemingly simple, but very important question.
Acrylic came to the plumbing industry from dentistry. There it was widely used for lining metal frames of dentures and making full-fledged crowns. Being a durable and wear-resistant material, acrylic easily competed with steel and cast iron in the manufacture of sanitary equipment (shower trays and bathtubs).
Acrylic is a fairly demanding material. Although it is shock-resistant, small scratches easily appear on it, which subsequently darken and greatly spoil the appearance of the bathtub. In order to avoid the appearance of microcracks and scratches, it is necessary to observe some precautions during the daily use of an acrylic bathtub:
Advice! To keep your bathtub sparkling white, you need to provide it with daily care. Avoid heavy contamination. Complex limescale masses are much more difficult to get rid of.
For those who daily wonder how to clean an acrylic bathtub at home, let us tell you that the best remedy for the formation of stains and deposits is prevention. After each use, it is enough to rinse the bathtub with a stream of clean running water; a better effect can be achieved by using a soft soapy sponge. And after washing, wipe dry to avoid drying drops of hard water on the surface of the acrylic.
Even with the most careful care it is impossible to avoid serious contamination. This can happen either due to the owner’s negligence or under the influence of hardness salts contained in water masses. Also a dangerous enemy for acrylic is rust formed on damaged parts of the faucet, pipes or other metal elements. Acrylic absorbs the substance and it is not possible to remove it with a regular brush.
For stains from rust or other contaminants, you can use special acrylic cleaners. But their effect will only be effective on a fresh stain. Besides chemical substances should be used very carefully and diluted big amount water. Otherwise concentrated chemistry may cause even more harm. As for limescale, cleaning acrylic from it is also done using special chemicals.
No chemical can deal with old stains from rust or limescale. Here they use more radical methods cleaning. To do this, you need to stock up on soft sandpaper and carefully clean the stain with it. After this, the stripping area is treated with acrylic polish. This method is best left to a warranty service technician or licensed technician.
The range of acrylic bathtubs is not limited traditional products. There is a wide range of more expensive and considered elite in their category - hot tubs. The difference lies in equipping a conventional product with nozzles, into which, using circulation pump a directed flow of water is supplied.
If the hydromassage function is not used regularly, the following may form on the nozzles:
To clean such a bathtub, a number of measures must be taken.
At the final stage, clean water will rinse all the detergent pipes and the bathtub is ready for use.
Important! Do not use bleach or other chlorine-containing products as a disinfectant. This is especially true for hot tubs. They not only damage acrylic, but also instantly destroy silicone and rubber seals.
Acrylic bathtubs are absolutely not protected from aggressive substances, so there is a large list of cleaning products, the use of which is strictly prohibited. Some of them remove the glossy shine from the acrylic surface, while others completely destroy it.
Such substances include:
Everything is clear with abrasives - they damage the surface of acrylic, forming small scratches on it. Fighting them will cost some physical strength and financial investment. Small cracks and scratches are rubbed with special polishes, and deeper ones are sanded using soft sandpaper or a sander, in special cases filled with liquid acrylic made specifically for repair work.
The decision to disinfect with chlorine can lead not only to dulling of the material and loss of shine, but also to the formation of small roughness on the acrylic (destruction process). Acetone and other solvents, like ammonia, can also cause the bathtub to lose its gloss. But this is not the worst thing. Prolonged exposure of acrylic to solvent will certainly lead to corrosion of the material and the formation of dilapidated areas.
You should always remember that the use of chemicals for an acrylic bathtub is allowed no more than 1-2 times a month when completely disinfecting the bathroom. On other days, it is best to resort to routine cleaning and use the least aggressive preparations: soap, soft cloth or sponge.
Not everyone trusts chemical cleaning products. In some cases, they can lead to detrimental consequences for acrylic. Sometimes the cost of products is beyond the buyer's means. Or the user is allergic to chemicals. In such cases, the cleaning agent can be prepared according to folk recipes, using available products, most of which are in the kitchen of any housewife.
There are many more ways to clean acrylic from stains, but the best of them is prevention. Avoid plaque deposits. Rinse your bathtub every time after use and your bathtub will remain sparkling clean for years to come.
How to clean an acrylic bathtub at home: how to wash and care
.jpg)
