We will send the material to you by e-mail
To make your own personal plot comfortable to use and beautiful, you need to use such elements landscape design, like flower beds, paths, gazebos, etc. Garden furniture is especially important. This is what guarantees your convenience.In our review we will find out how to construct a garden bench with a backrest with your own hands. Drawings and detailed photos will allow you to make the best design.
Comfortable garden furniture is a wonderful addition to the garden ensemble
Before you make a bench for your dacha with your own hands, let's figure out what types of this design exist. Classification can be made based on factors such as material, functionality and characteristics.
Benches can be only a piece of furniture intended for sitting, or have multifunctional purpose. For example, used as a rocking chair or table.Original benches – swings – are also popular. Designs with backs that are stationary are in demand. They are made of brick or concrete. There are also folding benches.
The following materials are most often used for the manufacture of products:
You can even make the product from concrete. There are also combined options DIY garden benches with backrest. The drawings will help you build a structure from any material. You can combine a metal frame with wood slats. You can also combine stone and wood.
Benches can have different designs:
When creating designs in an artistic style Special attention is given to appearance. Instead of side parts, all kinds of shapes can be used.
When creating drawings, it is important to take into account the general appearance of the product, as well as all dimensions of the structure. Furniture made of wood, forged steel or stone will fit perfectly into a garden created in classic style. And plastic products are suitable for landscape design in a modern style.Where to place the bench matters. You can place it near the porch, or also place it in the back of the garden under a beautiful tree.
For your information! A bench made of wood can be used comfortably at any time of the year, since the level of thermal conductivity is lower than that of stone and metal.
You can try making a metal or wooden bench with a backrest with your own hands. Metal products are known for their particular strength. However, they do not require constant attention. They can be coated with a special anti-corrosion compound only once a year.Modern designs using forged elements are made using a welding machine.
Wood is used to make benches with beautiful design. These products are suitable for almost anyone landscape design. To protect such structures, you can use special varnishing compounds.
This will protect the wooden surface from the development of mold, fungi, and also from sunlight. It is rare to use completely metal products, since they cool down very much in the cold season and heat up in the heat. Most often from of this material are being carried out load-bearing elements
and legs, and the back and seat are made of wood. From profile pipe Rectangles are made, and then jumpers are welded to the side walls for support. You can build more functional design
with armrests, soft pillows and backrest.To create smoother lines, you can bend the pipes. This will result in furniture with rounded edges.
Benches made from boards are popular. The design can be made in the form of a sofa, and pillows can be placed on top.
For your information! The use of special coating compositions will allow the natural design of such materials to be preserved for a long time.
You can make a garden bench with a backrest from stone with your own hands. This material has high performance properties and significant strength. Stone structures can be used for any garden style and design. Use of stone elements to complement general design. Such furniture looks good against the backdrop of a building that has individual stone details.A stone bench will make a wonderful combination with stone flower beds, steps, ponds and paths. Such benches are often combined with wood.
For your information! Marble is often used to build such benches. Sometimes quartzite and even coarse granite are used.
Plastic products also have certain advantages. Here they are:
You can use all kinds of combinations that will differ or be combined in texture, color palette and materials. A good solution is the combination of stone and wooden parts.
Try to make original combined designs. This can be a sandbox bench for children, as well as a flowerbed bench.
To make a bench with a wooden backrest with your own hands, you first need to understand its design. A simple device involves sitting on some supports. But there are also products that have a non-standard configuration, designs with forged or carved parts, as well as furniture with armrests.
A simple solution is to use two boxes and a couple of boards. In this case, the boxes will be installed as supporting elements. They can be filled with soil and made into them beautiful flower bed. A seat is assembled from boards, which is installed between the drawers. Be sure to sand the surface using sandpaper. For more practical design, you can replace the drawers with stone or concrete cabinets. Seats can be made from halves of logs or from treated boards. The seat must be secured using metal corners. Dowels are used to attach them to concrete bases. And fixation to wood can be done using self-tapping screws and through bolts.
| Image | Stages of work |
|---|---|
 | Will need detailed drawing with all sizes |
 | The workpieces must be polished. The rear legs also provide support for the back. All blanks are pre-marked. |
 | At a height of 40 cm, mark a place to fix the seat. Then the board is cut at an angle of 20 degrees. The front and rear legs are attached using timber. |
 | The side parts are attached using seat boards. They are screwed in with self-tapping screws. To secure the structure, you need to tie it using a beam. Two boards are attached for the back. |
 | Finally, a special coating is applied to protect against precipitation. |
Helpful information! Flowerpots with decorative bushes and dwarf trees can be used as supports.
You can build a convenient design with storage boxes. It is worth using old furniture. Before work, you need to choose the right screws. Their thickness should correspond to the thickness of the wooden elements.
A bench with a drawer is a wonderful solution for a loggia and balcony. In this case, you can use the old balcony. The design with a drawer consists of two walls, a seat and sides. It is also recommended to make the bottom of the box. Metal corners should be used as fasteners.The structure can be varnished. And in order to make it comfortable to sit, additionally position soft pillows.
It's easy to make a bench out of wood with armrests. To do this, you will need special beams for supports, boards for the back and seat, glue, saw, dowels, and a milling machine.First, a drawing of a wooden bench with a back is made. Then the templates are cut out according to the diagrams. Contours are placed on all workpieces, and why are the parts cut out with a saw? The cuts must be polished. Holes are made in the slats for the backrest. First you need to fill them with glue, and then insert the dowels into load-bearing beam. The planks are fixed with dowels. Then the bench is covered with a special varnish composition.
A practical solution is a garden bench made of logs. To make a seat, the tree trunk is sawn into two parts. The back can be constructed from a trunk that is thinner than the seating element. The legs can be made from the remains of a log. Connections are made using metal pins. Here's how it's done:
The fastener is installed using a hammer. The pins provide a strong connection to enhance fixation. The surface of the structure must be sanded.
A bench in a rustic and ethno style will fit perfectly into the decor of the yard. With its help you can create a magnificent natural corner. To build such structures, wood with or without bark is used. When making benches, you can use a variety of curved shapes. Before construction, all parts must be sanded and processed.An unedged board is used to create the seat. All design details have rounded shapes.
Ethnic style benches go perfectly with wicker fences. In this case, you can build the back in the form of weaving. The branches should be placed tightly. But you need to leave gaps between them. To create furniture in an ethnic style, materials such as stone, wood, bamboo or even rattan are suitable.
Here are some popular designs:
When making a bench, individual needs are taken into account, as well as certain parameters. To create a high-quality design, you will need a drawing with all dimensions.An important point is the calculation of the amount of materials, which will depend on the final design parameters.
DIY garden bench with backrest drawings: double designs
Do-it-yourself bench for a summer cottage made of wood: how to make it step by step First of all, boards for sitting are prepared. In this case, the material is cut and processed. It will help in this matter Sander
Metal pins are used as fastening elements. For greater strength, you can use special glue. Pins are also used to securely fasten the backrest. After marking, you need to measure the distances from the edge.
The assembly goes like this:
How to make a simple design, look at the video:
The seat boards are then secured to the legs using nails. After this, the nail heads can be masked with a mixture of mastic and sawdust. Be sure to cover the surface with paint or varnish.
You can make a bench from pallets with your own hands. You can see photos of interesting options on our website. Such furniture can be placed not only in the garden, but also in a country house or on the veranda. For installation work you will need three pallets.
This is how the assembly works:
For your information! Soft objects can be secured using straps.
The transforming structure is independently constructed. For this you will need boards and bars.
You can build the structure by performing the following steps:
Here is a convenient transformer design:
To create the axis of rotation, you need to make two holes on the rear leg. The backrest is secured to the base using bolts.
Article
garden bench- This is not just ordinary furniture designed for relaxation. With the help of this furniture you can decorate your garden plot, create entire compositions that will fit perfectly into the surrounding space of your garden or yard. It’s not difficult to make a garden bench with your own hands; the main thing is to choose the design of the furniture, its location and the material from which it will be made.
Light plastic furniture has many advantages: it is easy to move from place to place, it is easy to care for, it has affordable price category. You can choose any color option that fits perfectly into your landscape design. Minuses plastic furniture: quickly becomes scratched, fades in the sun, looks cheap.
Or even a chair. By the way, the chair cushions are foam chips in plastic bags. Warm, cozy, extravagant 
This material is ideal for creating furniture: it absorbs heat, looks noble, and is easy to process. Any type of wood is suitable for making a bench, the main thing is that the material is sufficiently well dried and has no external defects.
This one is natural and beautiful material fits perfectly into any stylistic direction landscape design. Stone compositions look solid, noble and unusual. But, despite many advantages, a natural stone has several disadvantages. Sitting on a stone bench is not very comfortable, and it is also unsafe for health. Therefore, it is imperative to make warm covers or pads along with the bench. Stone compositions are installed permanently; they cannot be moved from place to place.
Garden benches, made by hot or cold forging, are a real decoration for a garden or a place to relax. The designs look beautiful and stylish, especially if additional decorative elements. Metal is most often combined with wood, glass or other material.
First of all, you need to think about the ergonomic design of relaxation furniture. It should be convenient and comfortable. It is best to make furniture with a backrest on which you can lean back and relax.
A garden bench must be strong, carefully assembled and withstand heavy loads. For these purposes, it is best to use high-quality materials and fittings.
Since the furniture is made for the garden or yard, the material must withstand all climatic changes without defects or damage.
Garden benches
The length of the seat and backrest will be 1500 mm. This furniture can comfortably accommodate three people at once. Seat height - 450 mm, back height - 900 mm. It is advisable to place the back at an angle of 18-20 degrees. The seat width is 400 mm.
Step 1. Boards for making a bench can be purchased immediately to size; if they are not available for sale, the wood will have to be cut into blanks using a jigsaw or miter saw.
After the wood is cut to the desired length, it needs to be carefully processed. The blanks for the back and seat need to be sanded. All ends of the boards also need to be processed with an electric planer, it is advisable to give them a rounded shape.
Step 2. The long rear legs of the bench, which additionally serve as a frame for the backrest, need to be set to the correct angle of inclination. To do this, you need to apply markings to two wooden blanks having a length of 900 mm.
The first to be noted is the height of the bench - 400 mm. This section of the board does not need processing. Starting from the segment, you need to make a 20-degree cut along the entire remaining length of the board, which forms the angle of inclination of the back of the bench. The cuts on the two rear legs should be the same in both height and angle. Otherwise, the bench will be skewed.
Step 3. The legs are assembled first in the bench design. The distance between the front and rear legs is 280 mm. The legs are connected by a beam, which is cut to cover the entire width of the bench - 500 mm. It is advisable to do a double strapping - top and bottom.
Step 4. After the two sides of the bench are assembled, you can connect them together with boards intended for sitting. The boards are screwed using self-tapping screws to the upper beams of the frame. It is advisable that between wooden blanks gaps of equal size remained - 1-2 cm. These gaps promote air circulation and moisture removal.
Step 5. Strengthening the bench structure. In order for garden furniture to be stable and durable, it is advisable to strengthen its structure. For these purposes, you need to make the lower strapping along the legs using beams. Two pieces, 1500 mm long, are screwed to the front and rear legs of the bench. If there is not enough lumber, you can use one crossbar, which is attached to the lower beams of the frame.
Step 6. Installation of the bench back. The bench is almost ready, the final touch remains - attaching two boards that serve as a backrest. It is recommended to attach the first board at a distance of 200 mm from the seat. The second is at a distance of 380 mm from the seat.
Step 7 Finish coating for garden furniture. To protect wood from damage environment, it is advisable to use varnish. Impregnation will protect the bench from moisture, mold, and pests.
The varnish will give the furniture a beautiful and elegant look. To give the wood shine, you need to thoroughly polish the material and varnish the workpieces several times.
Find out some interesting options on how to make it from our new article.
You can decorate your garden plot not only wooden furniture. Metal benches are another way to create a cozy and comfortable place to relax. To make a metal frame, it is not necessary to master hot forging techniques.
An example of a bench made of metal and wood You can use cold forging technology, in which a frame of metal blanks is welded in single design. Can be refined during manufacturing various elements decor, unusual inserts and additions.
It is quite difficult to make a complex and elaborate bench design without experience. But you can make a simple and durable structure without difficulty.
Step 1. Develop the dimensions and dimensions of the bench. A standard-sized garden bench has a length of 1500 mm, a width of 400-500 mm, and a back height of 800-900 mm. Corner furniture shapes are the easiest to make, so for the first time it is better to try to make a simpler model with your own hands.
Step 2. Making a frame for the seat. The metal pipe needs to be cut into 4 fragments: 2 x 1500 mm and 2 x 400 mm. All details are in a rectangle. To make the seat more durable, you can weld 2 additional stiffeners into the rectangular frame.
Step 3. Making legs. The metal pipe needs to be cut into 4 identical sections of 460 mm each. These blanks need to be welded to the corners of the bench. It is recommended to weld additional stiffeners between the front and rear legs.
Step 4. Making the back. Two workpieces 440 mm long and one workpiece 1500 mm long need to be welded together. This structure is then welded to the finished part of the bench. The back should be mounted at an angle of 15-20 degrees. In this case, sitting on the bench will be comfortable.
Step 5. To make the back of the bench stronger, you can additionally strengthen its frame with stiffeners, transverse or longitudinal.
Step 6. The metal frame of the garden bench is ready. The final work is cleaning all weld seams, polishing the metal and coating the frame with a primer.
Step 7 Making a back and seat from wood. Wooden boards or beams are the most suitable material for finishing a metal bench. The wood for the back and seat must be carefully planed and polished, and the chamfers must be processed. The wood needs to be cut into blanks that can be fastened both along and across the back and seat. It all depends on the length of the material.
Step 8 Using an electric drill, you need to drill holes for installation in the metal frame of the bench wood finishing benches. To connect metal and wood, it is recommended to use bolts with rounded heads and nuts.
Step 9 After the back and seat are screwed to the metal frame, the wood needs to be covered with stain or varnish. This will protect the material from environmental influences.
The garden bench is ready. Due to the fact that the metal pipe is hollow inside, the furniture is not very heavy and can be moved from place to place. Well-processed metal and wood can easily withstand high humidity and temperature changes, so a DIY bench will serve for many years.
Garden bench for the prevention of spinal diseases: side support, back and front legs, armrest, rectangular frame, bent under obtuse angle, wooden seat, wooden back, armrest section with through holes, hinge joint, side view Side support, rear and front leg, armrest, rectangular frame bent at an obtuse angle, wooden seat having a width less than the width of the seat outline, and wooden backrest spherically curved upwards, section armrest with through holes, hinged joint, wooden seat and backrest in the form of a beam, moved along grooves to extreme positions, side view. Mounting point for a wooden seat or backrest, vertical hole and metal plate with a hole. 
Relaxing on a garden bench is a pleasure
At your summer cottage, you really want to have a corner where you can relax and enjoy nature. It is impossible to imagine such a place without beautiful bench. A self-made garden bench can not only save money, but also fulfill the individual needs and ideas of everyone, because there are a lot of options and techniques for making it, and from them you can choose the one that suits you.
Before you start making your own bench, you need to be very careful about where to place it. This issue is worth addressing because a bench is not only an object for the convenience of relaxation, but also a place where sufficient work will be carried out. a large number of time, and therefore the view and atmosphere must be suitable. In addition, much in its design and installation process will depend on the selected area for installing a garden bench, as well as its type.
Examples of the location of garden benches from the design side.
A bench for a summer house made of wood combined with forged wood frame.  A bench made of logs with a stone base.  |
It will fit very harmoniously into a garden in which trees with large crowns and various fluffy shrubs grow. |
Romantic style bench, openwork  |
A garden of young trees or a vineyard would be a good place to place it. |
Miniature bench painted white  |
It would be ideal to be in contrast with a dense hedge of rich green color. Also good option For such a bench there would be a pond, flowering flower beds, or simply in a secluded corner decorated with flowers. |
Retro bench made of “old” wood  |
It can create a very mysterious atmosphere together with old trees with curved trunks located nearby, near which flowers of different types are planted. |
Bench combined with decorative items  |
A very popular place to place a bench is a veranda or gazebo. In this case, a do-it-yourself garden bench should be made in a similar style with existing decorative items and the veranda or gazebo itself. |
Combined benches and table  |
This design will be good on a small spacious plot of land, which can be decorated with floral vegetation, and can also be located next to the house or under a canopy. |
In addition to the options listed, you can install a bench in a place where children usually spend their leisure time, which will allow you to be close to them when they play. It will be especially good to organize a place to rest if there is a lone tree on the site, which has a spreading crown, by installing a bench directly under it.
In addition, you can organize a canopy near the house, under which you can place a garden bench. It will be good place rest even in rainy weather. There is another option to simply locate a bench in the beds where crops are grown - it will be convenient for relaxing between work in the garden.
Important: It is best to choose a location so that there are no annoying objects or buildings, garages, fences, etc. in the field of view. It is worth remembering that the view should lift your spirits and promote relaxation, and not be a reminder of how much work remains to be done at the dacha.
There are a great many options and ideas for implementation that a DIY garden bench can allow you to implement. It’s quite simple to come up with a decorative composition with its participation; for example, it looks good on elevations, decorated with boulders or shrubs; a bench that harmoniously merges into a flower bed is also pleasing to the eye.
After the location of the bench has been determined, you need to start planning the future product. It is worth considering a few points:
Table of standard bench sizes.
| Seat height, m | Seat width, m | Back height, m |
| 0,4-0,5 | 0,5-0,55 | 0,35-0,5 |
When the drawing plan is drawn up, you can easily determine the size of each part of the bench from it, and then begin its manufacture.
It is also worth asking about the material from which the DIY garden bench will be made. Each material has its own special nuances that can be used as advantages to achieve the desired result.
In addition to the previous nuances in the process of designing a product, it is worth taking into account a certain list of requirements that it must meet. The following must be taken into account:
There are quite a lot of variations in which a garden bench can be made with your own hands. When it comes to products made from wooden material, then for this you will need the following list of tools and materials.
Any country bench has essentially the same assembly process. To more accurately understand such a process, it can be considered using a specific example, based on the material listed above.
Help: A similar principle is used when independently creating a bench from wood in any version of its design.
In order to avoid any problems in the process of drawing up a drawing, it is possible to use a ready-made one. This bench is very easy to make. It is only necessary to install additional support bars of three larger and smaller sizes. Assembly occurs according to the specified principle.
Help: You can diversify such a product simply by changing color scheme, as well as drawing various kinds of patterns. But at the same time it is necessary to carry out processing of the wood material.
It is also quite simple to design, plus it is possible to vary the backrest by changing the arrangement of the slats, for example, making them cross-shaped. If you approach the process of creating such a shop with all the specified nuances, then it will not be used for a long enough time. For the drawing, you can use an existing one, and take the dimensions from a standard sample.
A DIY garden bench can be made not only from wooden material. You can use a metal frame, which is not difficult for anyone to make, even if you have no experience in forging metal.
To construct a frame for a bench, you can use cold forging, namely, to connect parts into an integral structure metal frame. At the same time, you can complement the product with something, decorating it.
The table shows the principle by which you make a garden bench with your own hands.
| Process | Description |
| Sizing | If there is no design of a bench in which all the dimensions will be correctly compiled, then you can use the dimensions of the standard sample. It can be a seat length of 1500 mm, a width of 500 mm, and the backrest with such values will be 900 mm. If the task of creating a bench for the garden is new, then it is better to use a type of product that is one of the simplest in design and size. |
| Frame construction | The seat is made first. To do this, you will need several sections of pipes, 1500 mm and 400 mm long, two pieces each. If such segments are not ready-made, then you need to make them yourself. To achieve a more reliable structure, you can supplement the structure with stiffeners welded to the frame. |
| Designing the legs | The length of the legs should be 460 mm, this is exactly the size that the pipes need to be made for this. Also, in addition, it is necessary to ensure that the front and rear legs are connected to each other. This will provide a better degree of stability. |
| Making the back | The back is made in such a way that parts of pipes measuring 1.5 m and 44 cm are welded to each other. After this process is completed, you can start welding it to an already manufactured part of the structure. It is best to position the backrest at an angle of up to 20 degrees, this will provide an optimal level of comfort when sitting on the bench. Regarding the reliability of the backrest, stiffening ribs in the longitudinal and transverse directions will help here. |
| Polishing | To complete the construction of the metal frame, the existing joints should be cleaned, as well as the metal product should be polished and coated with primer. |
| Manufacturing of wooden elements | In order for it to take on a complete look, you need to make wooden parts that will be attached on top of the frame. Such elements can be easily completed using timber or boards. Depending on the size of the frame product, you should determine the size of the wooden elements, as well as the direction of their attachment. You must also keep in mind that all parts must be smooth, without any kind of damage. |
| Connecting all the elements | To connect all manufactured elements, you can use electric jigsaw and make the required number of holes in the frame and wooden parts to attach them to each other. As fastening elements It is best to use bolts that have rounded heads, as well as nuts. |
| Completion of work | And the very last touch, before the garden bench is made on your own and ready for use, the woody areas should be treated with stain. You can also use varnish for such purposes. This procedure will protect the material from many undesirable factors. |
The good thing about this design is that due to the material that goes into the structure, it is light enough to be transported or moved to the desired location if desired. It is also important that changes temperature regime Such a product is stable, which is why it will be possible to use it for more than one year in a row.
When making a garden bench with your own hands, it is better to keep in mind the following rules, which will greatly simplify the work and help avoid difficulties:
Bench – required element any summer cottage. Today, such designs are performed by many important functions: from its direct purpose to giving the garden unique design.
Many owners of suburban areas prefer to build benches themselves, since this simple task will not take much time and money.
There are several basic materials that are used as the basis for constructing benches.
The most popular option is wood. It is believed that it is from this material that the most aesthetic designs are obtained.
Due to the universal aesthetic characteristics of the material, wooden benches fit perfectly into the landscape of any garden. It is important to consider that the benches are constantly under open air. Therefore, it is necessary to choose those types of wood that are characterized by maximum resistance to atmospheric conditions.
These include: hazel, oak, cherry pine, and larch. For additional protection the material is coated with a special varnish.
Metal is popular for the production of benches for many reasons: durability, practicality, resistance to precipitation, ease of use. As optimal option Openwork designs with interesting patterns are most often made for the garden. As an alternative, you can stick to minimalism.
Stone benches are impressive and monumental. Main materials: granite, marble, quartzite. In some cases, rough stone is used to create a unique design, in others, stone with a smooth surface is used.
Plastic is the most affordable convenient option. It is considered more seasonal and budgetary than aesthetic and decorative. However, with the correct design of a plastic bench, it can become a decoration of the garden. Colorful pillows, lanterns, flowers and much more are often used for decoration.
Garden benches are traditionally divided into several categories. The criterion for division is location.
They are usually installed near the threshold, which determines the choice of material. Design experts insist that the appearance of the front bench should match the exterior country house. Thus, if the structure is made of stone, then the bench, accordingly, should also be made of stone.
The main purpose is to be able to spend time comfortably near a body of water. For the construction of structures, it is recommended to choose waterproof materials - artificial or natural stone.
Can be located virtually anywhere in a summer cottage. Plastic is usually used as a base, as it is lightweight and easy to maintain.
An indispensable option for hardworking summer residents. Garden benches are installed so that the owners of the site can relax comfortably while working in the garden. To ensure aesthetic pleasure that accompanies relaxation, the structures are located next to flower beds.
This variety can also be called a “solitude bench.” The fact is that they are usually placed in the most remote places garden so that a person has the opportunity to hide from prying eyes. A popular material for manufacturing is wood.
This is a foldable design that is lightweight. This makes the task of moving the bench from one place to another much easier: summer period– in the shade, in autumn or spring – in sunny places. Optimal material– plastic.
There are many different types wooden benches. We'll look at a few of them.
Materials:
Step 1. We dig two holes and level them in depth.
Step 2. Align the angles between the posts and bars so that it will be comfortable to sit on the bench later.
Step 3. We nail the bars with nails at 200 millimeters.
Step 4. Bury the blanks.
Step 5. Compact.
Step 6. Nail the back to the posts.
Step 7. Nail the back to the bars.
Step 8. Treat the wood with special enamel or varnish.
The described option is an ordinary country bench, which acts more as a functional option than a decorative element.
List of materials:
Step 1. Arm yourself with a calculator and tape measure, calculate the dimensions of the bench.
Step 2. Sand the boards so that there are no nicks, burrs or other defects left on them.
Step 3. Cut out 46 pieces of equal length (about 50 centimeters each).
Step 4. Set aside 6 pieces to the side for further construction of the turret.
Step 5. Assemble the support boxes from 40 pieces.
To do this, we place two segments parallel to each other, and then place two more segments on top perpendicular to them. In this way we lay out the remaining planks to form a turret. We secure the corners with glue and self-tapping screws for greater strength. Each drawer requires 20 slats.
Step 6. We take long boards and begin to make a frame for the future structure. To do this, we lay the boards on their sides and secure them in the middle with a crossbar.
Step 7. Attach the frame to the support boxes using self-tapping screws and glue.
Step 8. We make a “turret” from the remaining 6 segments. To do this, we lay the planks on one of the support boxes in the same way as we did earlier.
The last row must be made continuous using short pieces that are inserted between the walls of the boxes.
Step 10. If desired, we make “window sills” on the top row by adding four sanded boards with oblique corners.
Step 12. Take long boards and cover the future seating area with them.
Step 13. Place pots with plants in the turrets.
This is a very beautiful and simple design that does not take up much space, but contributes to pleasant leisure time.
We will look at the production technology of the simplest country bench without a back. It only takes a few hours to assemble the bench. The basis of this design is a profile pipe.
Set of tools:
Step 1. Determine the location of the future bench and carry out the appropriate calculations. The standard length of such a bench is 120 centimeters.
Step 2. Using a grinder, cut three metal blanks 120 centimeters long. They will act as a seat.
Step 3. Lay the pieces evenly on a flat surface. You can use a stove.
Step 4. Take a steel corner and cut off two cross members.
Step 5. We apply the crossbars perpendicular to the workpieces, stepping back from the edges about ten centimeters, and weld them.
Step 6. We weld two bench legs to the corners, the length of which is adjusted according to the wishes of the owners of the site.
Step 7. We weld a transverse bar to the legs, stepping back from the bottom of the seat by about 20-25 centimeters.
Step 8. From the scraps of the corners we make two crossbars.
Step 9. We weld these crossbars to the bases of the bench legs.
Step 10. Apply a protective coating to the metal.
Step 11. Install the bench.
If desired, you can modify the structure by welding railings and a backrest to it. Bright paint will give the bench an interesting appearance.
First of all, you need to decide what materials will be used as the frame of the structure. It can be:
Also during the work you will need the following materials: clay, straw, water, sand, paint, brushes.
Stage 1. Mix straw with sand and clay.
Stage 2. Add water to the mixture and stir the contents of the container.
Stage 3. Using your hands, roll small balls from the solution.
Stage 4. We apply the balls to the pre-prepared frame, thus forming the outline of the future bench.
Stage 5. Cover the finished bench with polyethylene so that the solution gradually dries and does not crack.
It is believed that clay benches can last up to a hundred years without losing their attractive appearance. In addition, this is a fairly economical option that will certainly add originality to any garden.
Choose the option that will fit well into your garden plot and will bring maximum satisfaction.
In order for the garden plot to be comfortable enough, it should be properly equipped. An important component are garden benches. You can make them yourself different ways and from various materials.
By looking at the drawings of the bench, you can find out the features of its structure. You can make such a design with your own hands relatively easily, quickly and without high financial costs.
Making a bench with a backrest with your own hands is described in great detail in step-by-step instructions.
Assembly: initial stage
After preparatory work The time for wood processing is approaching. In order for a hand-made bench with a back to serve for a long time and decorate the area, the materials must be pre-treated.
The tree is covered antiseptic compounds and let it dry. After this you can start collecting backrests
On one of the two-meter boards, fifty centimeters are measured from the edges. At this level the edges of the beton slabs. From this mark another fifteen centimeters are measured towards the center of the board. This is where the first boards will be attached. From the resulting marks we measure seventeen and a half centimeters - the gap between the back boards. Next, we measure fifteen centimeters for two more boards. There should be a gap of five centimeters between them. All this can be seen in the drawing.
Wood glue is applied to fifteen centimeter sections. They are attached to boards, the length of which is sixty-five centimeters. Additionally, they are secured with self-tapping screws.
On top, between the boards of the back, pieces of seventeen and a half centimeters are glued. To ensure that the parts stick together well, they are clamped and held until the glue sets. After gluing is completed, the back is covered with an antiseptic.
All wooden parts can be covered varnish. This will give them additional stability and attractiveness.
Assembly of the main part
It is better to assemble the main part of the bench from both sides. Placed between the boards concrete plates, and M16 threaded rods fifty-five centimeters long are inserted into the drilled holes. You will need four of them.
The rods are fastened with M16 nuts and washers. Twist them at the same time different sides so that the bench is level.
You can make benches for your garden with your own hands quite quickly if you follow the instructions. Let's consider four options for such garden structures.
On drawings benches, all its features are indicated in detail. Making such a bench with your own hands is quite simple. The only difficult element is the concave seat.
The number of parts and their dimensions are indicated in the table.
We begin making a bench with our own hands from wood with blanks necessary details. Boards and beams are cut into pieces of the required length.
Making seat supports will be somewhat more difficult. You will need to mark the blanks. Two points are marked along the edges at a distance of seven and a half centimeters from the bottom side, and in the center a point at a distance of four and a half centimeters. They are connected using a flexible plastic ruler and cut out jigsaw. The sections are processed with sandpaper.
The seat supports are attached to the two upper drawers. One on each edge and one in the middle. Next, screw in the supports, spaced from the outer ones by the width of the leg. All connections are made with self-tapping screws.
Boards are attached to the resulting base seats. It is advisable to deepen the screw caps.
Then attach legs. They are attached to the seat supports. The lower drawers help secure the legs.
The finished product is coated antiseptic and varnish.
To make such a garden bench with your own hands, you will need concrete flower girls and boards. Flower girls are required to create the base of the bench. Use two with a rectangular base and two cubic ones.
To make the base stable, the flower boxes must be glued or connected from the inside with staples secured with self-tapping screws. The container is filled with a layer of drainage and soil. This increases their stability.
The seat for the bench is made of boards. To do this, they are cut into pieces of the required length. These blanks are laid so that there is a distance of half a centimeter between them. Then they are connected using transverse strips. The planks are placed in three places: at the edges and in the middle. Corners are attached to the slats. With their help, the seat will be secured to the flower girls.
Prepare the bench parts shown in the figure. They are being processed antiseptics before connecting.
Then the parts are assembled into supports. The corners are first rounded and chamfered. First, parts A and B are connected with a bolt, and then B, C and D are also connected using a bolt.
The inclination of the backrest is determined by part D, after which it is connected to part A. Similarly, but in a mirror image, another support is made.
After this, the back and seat are assembled. To do this, the supports are placed so that there is a distance of one meter and twenty centimeters between them. First, the front and rear strips are screwed to the supports, then all the rest, and finally the stops are screwed in.
At the last stage, the back of this bench is screwed on.
Bench No. 4Another option for a simple DIY bench. Its length is one hundred twenty centimeters. The height from the ground to the seat is fifty centimeters, the height of the backrest is also fifty centimeters.
The base is made from boards, the thickness of which is five centimeters and the width from ten to twelve. One of the legs continues and serves as a support for the back. The supports are connected using the “half-tree” method and secured with bolts.
The basis for the seat is a block secured with self-tapping screws. The short supports on the back of the bench are connected with a collet to increase stability. The seat and back are covered with boards of less thickness. The surface is painted or varnished.
The dimensions of the structure and wooden parts can be seen on drawings benches. If we consider how to make a bench with our own hands, then this option will be the most optimal in terms of the simplicity of the process and the result obtained.
It is better to purchase materials already cut to size. If this is not an option, then you need to cut them yourself.
The resulting blanks polished. The ends of the boards are processed with an electric planer.
The back legs of this simple DIY bench also support the backrest. To create the desired level of inclination, the workpieces are marked.
At a height of forty centimeters, mark the attachment point seats. Above, the board is cut at an angle of twenty degrees. The cuts on the two workpieces must be identical.
First they collect legs benches: the front ones are connected to the back ones using a beam. It is better to do this from above and below.
When the side parts are assembled, they can be connected to each other with seat boards. Screw the boards with self-tapping screws, leaving a distance of one or two centimeters.
To strengthen the structure and increase its stability, make the lower harness timber along the legs. Two boards are attached for the back.
Finish the work with finishing coated, which will protect the product from moisture and adverse conditions.
Make a bench with your own hands from pallets It’s not difficult if you use your imagination. To do this you will need three or four of these wooden structures. Some will need to be sawed to obtain additional parts. The simplest DIY bench design is made from pallets, when two pallets are attached perpendicular to each other, creating a back and seat.
To prevent the design from becoming too bulky, it is better to cut the pallets according the right sizes. The elements are fastened with self-tapping screws. Add side parts to enhance strength and make legs. All this can be seen in the photo.
Since the material of the pallets is untreated and rough, it will be required first polish. This will allow you to avoid splinters.
The manufacture of a bench with your own hands from pallets is completed by coating it with varnish or paint.
You can make such a bench with your own hands if you have a wide board and cuttings for shovels. Curly seats are cut out of the board in the form of puzzle pieces. Legs made from cuttings for shovels are attached to them. The result is separate stools that quickly assemble into one long bench. All manufacturing stages are discussed in detail in step-by-step photos.
First option
To create such a bench for your dacha with your own hands, you will need four old chair.
From the first two chairs remove parts from the front of the seat.
The remaining sawed off the front legs are slightly lower than the seat structure.
From the resulting parts you need take off old varnish or paint. To do this, apply to the parts special remedy, dissolving paint coatings. Then the softened layer can be removed with a spatula.
The racks should drill holes for dowels. Holes are required on the front and end sides.
The dowels are lubricated with glue and inserted into the drilled holes.
When the dowels are glued, you can assemble base benches. To make the structure durable, the parts are fastened with self-tapping screws. Surface of the structure sanded.
For seats benches choose a board that is suitable in size, saw off the excess.
If several narrower boards are used, they are glued together with wood glue. For a tight connection, they are clamped with clamps and wait for the glue to dry.
The finished seat is also glued to the base with wood glue. Heavy objects are placed on the board and clamped together with the base with clamps.
When the glue dries, close the seat masking tape And paint paint the remaining structural elements for wood.
The tape is removed and the seat is treated stain. Finally, the entire bench is varnished.
Second option
To make a second garden bench with your own hands from old furniture you will need two chairs. It is better if the back and hind legs are not separated.
Two identical chairs clean up all parts of the structure except the rear legs with the back.
They take bars five centimeters wide and three centimeters thick. Cut two parts equal in length to the width of the chairs, and two pieces of the same length as the finished bench. A rectangle is assembled from these four parts. It is secured to the backs of chairs with self-tapping screws.
Another frame is assembled in the same way. Several transverse strips are attached to it. This design is attached under the seat, makes the bench more reliable and acts as a shelf.
If the chairs have old covering, then it is removed sandpaper. After this, the surface is puttied with a special compound or coated with a primer. When the layer has dried, it must be sanded with fine-grained sandpaper. Finally, the structure is coated with paint.
The seat for the garden bench is made by hand from Chipboard or plywood. A rectangle is cut out of the selected material, which is half a centimeter larger than the base on each side. Then cut out a piece foam rubber with the same dimensions. From upholstery fabric cut out a rectangle. It should be five centimeters larger than the seat on each side.
Foam rubber is placed on a sheet of plywood and covered with fabric on top. The fabric is attached from the inside out to the furniture stapler.
The seat is attached to the base with a piano hinge.
To make such a bench for your dacha with your own hands, you should prepare necessary materials. Manufacturing begins with creation basics designs. The seat bars are attached to the back bars at the selected angle.
Additional ones are installed along the seat ribs, providing rigidity.
Attached to the seat planks, drilling holes for fastening in the base bars. The same goes for the back.
Armrests are installed on both sides of the seat. They can be secured with bolts.
The resulting bench cover wood protection products and varnish. It is very important to paint everything as carefully as possible.
The bottom of the bench is reinforced with metal profile. Chains are attached to the profile on which the swing bench will be suspended. It is imperative to check the reliability of the beams on which the bench will be suspended.
To make such a bench with your own hands from wood you will need chainsaw. The main material is a thick log one meter long.
Log mark, so that you get two slightly unequal parts. The smaller one will be used to make the backrest, and the larger one will be used to make the seat.
Chainsaw log sawed along the mark. The resulting irregularities are immediately cut off with the same saw.
The cut triangular piece is cut into pieces and inserted into the holes in the seat. The back is secured on top. The bench is almost ready. All that remains is to give it a more decorative look.
Can the seat be placed on legs. To do this, recesses are made in the lower part to install a pair of logs as legs.
The design features of the transformer can be seen in the drawings of the bench. A transformer bench is made with your own hands from planed boards, which is sawn to the specified dimensions.
Sliced timber parts holes for fasteners are drilled.
At the table top, the boards located on the edge can be made wavy.
In material intended for countertops, drill holes with a diameter of twenty-two millimeters and a depth of three centimeters. Cuttings of the same diameter will be inserted into them.
The edges of parts and edges are processed and rounded. 
All elements are assembled using screws and screws. Screws are needed with dimensions 6x70 and 6x90, screws - 8x80.
Wooden parts are painted stain.
The structural parts that will move are connected by hinges.
Parts of a round shape are placed between the boards of the tabletop. cuttings
Install a stop for backrests
A hand-made transformer bench is covered varnish.
Making an original bench with a backrest with your own hands is not difficult if you have the tools and materials. First you need to consider the drawings of the bench, which contain a small amount of details.
The side parts according to the pattern are transferred to Europlywood three centimeters thick. They are cut out using a jigsaw and the ends are processed with a grinder.
To attach the connecting strips, markings are made. Then the holes are drilled. After assembling the frame, the slats are attached using self-tapping screws. The fastening points are sprayed, and the entire product is varnished.
The simplest version of such a bench is hexagonal The size depends on the size of the tree. Measurements are taken at the height of the seat. To the obtained result, add another margin of fifteen to twenty centimeters. If you divide the result by 1.75, you will get the length of the inner side.
To cut boards ten centimeters wide, they are laid in four rows with intervals of one centimeter.
The cutting location is marked immediately for all rows with an angle of thirty degrees. So cut out six sets of blanks.
Legs are used with a height of sixty to seventy centimeters. They are connected by cross members by drilling holes and using bolts and nuts.
The seat is installed so that the joints are located in the center of the ribs of the legs. The outer parts are screwed on first, and then the inner ones. In this way, the entire hexagonal structure around the tree is assembled.
Finally, the back is made and the apron is installed. The result is a DIY circular bench with a backrest.
The finished product is processed oil impregnation.
A bench made of curved branches will look original. It will require branches for the front part, two legs, a horizontal top and a pair of transverse branches.
Sawing branches so that they fit together as accurately as possible. Next they are connected by metal corners.
Manufactured in the same way back and connect it to the front.
The finished product is placed on a flat surface and the seat is assembled.
