Water is necessary for humans not only as one of mandatory elements body, but also to perform hygiene procedures. One of its most pleasant and useful properties is its ability to calm, bring a feeling of comfort and bliss.
It is unlikely that you will find a person who would not like to plunge into the cool and clear water on a hot summer day or swim in the pool in the winter cold, taking a break from everyday worries.
Realities modern life dictate their own rules and today almost every private house has its own swimming pool. It can be of any size and shape, have various designs, but here flooring for a pool should be selected taking into account the high humidity in the room and have an anti-slip effect.
How to choose the right material so that it is easy to clean, has minimal water absorption, but at the same time looks stylish and does not slip. There may be several options. One of the materials that has been used for quite a long time is ceramic tiles. It meets almost all the requirements, except for one thing - some of its samples slide.
In this case, you need an additional anti-slip coating laid on top of it. To avoid unnecessary waste, you can use modern materials, which were developed specifically for swimming pools and other similar places.
German indoor standard DIN 51097: Class A: dry areas (changing rooms). Class B: showers, areas around swimming pools. Class C: steps to the pool.
They are a modular coating with an anti-slip effect, which is very easy to install and does not absorb moisture at all.
Floors in rooms with high humidity should have a water-repellent effect. Of all those presented on the modern construction market materials have such properties various types ceramic tiles and modular PVC or rubber coverings.
However, water absorption alone is not enough. After all, you always want swimming in the pool to bring only positive emotions, but this will not happen if tiles without an anti-slip coating are laid on the floor. This factor must be taken into account when choosing a material. The modular flooring intended for the pool has good anti-slip properties.
Therefore, depending on the area of application of floor ceramics, it is necessary to pay Special attention on these properties.
But is practicality the only thing that matters? Of course not. A swimming pool in your own home should fit into its overall style and certainly not look like a standard sports facility. Therefore, when choosing a flooring material, you need to take it into account color scheme, shape, size and other parameters responsible for aesthetic design and safe operation.
On the market you can find modular, anti-slip, PVC coating for pool floors, as well as double coating systems. Each of the materials is characterized individual characteristics, which allows them to be used in different conditions.
The flooring for this type of pool consists of many elements of different sizes, which are connected using locks. The modular covering is not attached to floor surface, which simplifies installation. The elements of the canvas located around the pool bowl hold themselves together quite reliably.
Such a modular carpet will not only reliably protect against moisture, dirt and slipping, but will also emphasize a separate design solution.
This material is presented different options, which differ in shade. In addition, the modular coating has a special surface, which reduces the intensity of its contamination. Main advantages:
And in addition, the modular covering has a textured surface, which makes it more attractive for a children's pool than, for example, open tiles.
One of the advantages of any rubber flooring is that the floor it hides, be it tiles or a self-leveling surface, will remain intact when exposed to mechanical loads.
IN in this case the flooring requires additional fastening to the floor using cold welding. This feature provides increased reliability of the coating and also does not allow moisture to penetrate under the material, as a moisture-proof barrier is created. The main disadvantage of a track with a double fastening system is the need to apply additional effort to fasten the material.
The covering with a double fastening system will need to be glued to the floor, making the floor completely waterproof.
Polyvinyl chloride can easily withstand loads, is resistant to moisture, and is easy to clean. The rubber coating made of this material is equipped with drainage holes that allow water to flow directly to the drain. This eliminates the possibility of puddles, which means the level of safety will be higher and you can use PVC paths to arrange a children's pool.
With its help, both the entire floor and individual strips are covered, which will provide a zone of safe movement around the facility. main feature material - surface relief, as well as the absence of the need for fastening to the floor, which is due to the presence of special fastenings on the reverse side.
Anti-slip coating is designed to prevent injuries on slippery floors in swimming pools, showers, and locker rooms.
The anti-slip coating for the pool is assembled into a sheet using locks that are simple in operating principle. This makes it easy to dismantle the deck around the pool for cleaning.
This material was created primarily for use on large areas. The strips are attached to each other with specially designed connectors. The material itself is characterized by a complex configuration: it consists of many jumpers that form through holes different shapes, so that the floor around the pool always remains dry.
If necessary, it is possible to cut strips to the desired length.
Basic criteria for choosing the best coverage The flooring for the pool is selected based on a number of parameters: external characteristics, the possibility of water outflow. But the most important thing is that it should be safe around the bowl (anti-slip surface of the path). This requirement applies to a greater extent to children’s pools, while in facilities intended for adults, there are also open tiles next to the bowl. However, regardless of the type finishing material (self-leveling floor, etc.), there is always the possibility of putting rubber flooring on top.
If you are the happy owner of a mansion with a swimming pool, then, of course, you want it to be the best in every way, so take the choice of flooring very seriously. It must be of high quality and comply general style. Today, manufacturers offer PVC tiles even with a 3D effect, which will allow you to create any picture on the floor. But we should not forget about anti-slip properties, they are mandatory.
The most popular option is an anti-slip PVC coating. It is hygienic, durable and easy to care for.
PVC flooring for swimming pools is available not only in the form of tiles, but also in rolls; which option to choose depends on the area of the room. If it is small, then it is more convenient to lay small fragments, while for large pools best choice there will be a second sample.
The pool must have a special floor covering; it can be made of ceramic tiles or PVC modules. Which one is better? It is quite difficult to answer this question. Each has its own characteristics.
Ceramic tiles are durable, reliable, and come in a wide range of colors, but PVC materials are not inferior to them in their characteristics. That's why right choice can only be done taking into account the characteristics of your specific room and tastes, but still the majority give preference to modern floor coverings and they are right in their own way.
1 sq. m of coating can cost from 380 to 3,900 rubles, which is influenced by the parameters of the material (dimensions, texture, pattern configuration), method of fastening and brand. One of the most popular manufacturers in this area is PlastFactor LLC. It produces products under the brands SENSOR, FACTOR, OPTIMA, etc. The assortment includes modular coatings different types, different in the type of lock, texture, pattern of the drainage system lintels, as well as in shade. average price material: from 1,500 to 2,000 rubles/sq. m.
FACTOR coating series AQUA: Thanks to its structure, it does not retain water and remains practically dry at any time. Drainage system ensures the absence of puddles and ventilation of the base.
Another manufacturer, Orion, offers a wider range, which includes both modular and roll material. The floor for covering the pool in this case lies in the same price category, as the above flooring. Additionally, the manufacturer also produces anti-slip tape.
Another brand, Muovihaka OY (Finland), offers Ultima series coatings, as well as components for them. This group includes both roll and modular materials. Their price is noticeably lower than both previously considered options.
For example, a modular rubber coating can be purchased for RUB 1,200/sq. m, and rolled flooring will cost less: from 600 to 1,100 rubles/sq. m. But in any case, when comparing tiles and rubber material, the second option will cost more.
Thus, if the floor in the pool, bathroom or sauna is tiled, it can be protected using PVC flooring of any type (modular, roll, special anti-slip materials). Each option has its advantages, for example, the modular canvas is easy to assemble and does not require additional fastening to the floor.
Rolled flooring will cover large area with a minimum number of connecting seams. The anti-slip coating is characterized by a textured surface. All these materials are safer than open tiles. In addition, they can be used both on the entire floor surface and in individual areas.
Did you need to buy pool flooring to replace the old one or to improve the conditions for exercise and training? Then check out the catalog various options roll and modular pool covers at prices that you will definitely be able to afford. The products presented in the SPORTS-TECH online store are extremely high quality and have all the necessary performance characteristics to ensure maximum comfort and convenience when exercising in the pool.
Select the type of coverage you need and add it to your cart indicating the quantity. note that roll coverings They are sold in rolls, and modular ones are sold by the square meter. After selecting all the necessary products, you can receive a commercial offer from our company, or immediately purchase the product by completing a quick registration.
The following products are available:
In the SPORTS-TECH online store you can buy pool covers at both retail and wholesale prices. For small deliveries, retail is suitable, and if you need to equip kindergarten, sports palace or sports complex, then when ordering from 99,000 rubles. you will be given a 5 or 10% discount on the retail price based on the purchase volume.
We look forward to long-term cooperation and look forward to your feedback after your purchase!
Pool flooring is very important element in places where there is high humidity, such places, as a rule, include shower cabins, baths, saunas, baths or swimming pools.
Typically, in order for floors in rooms with high humidity They last a long time and do not absorb water; they are made of marble, granite or other durable material.
However, this coating is very slippery and cold. Thus, on a wet floor made of such materials it is easy to slip and fall or get colds.
Also, if you visit public places such as swimming pools or locker rooms, you risk contracting fungal infections.
Therefore, to get rid of such problems, it is necessary to use durable, lightweight, safe anti-slip coatings for swimming pools; special modular mats are provided for shower rooms.
When choosing an anti-slip coating for a swimming pool, you need to pay attention to some important qualities that they should have. Note that a swimming pool for a summer residence is also no exception.
When choosing a particular pool cover, pay attention to the fact that installation should not require specific knowledge or skills, also good coverage for a pool should not require preliminary surface preparation.
Changing elements must be carried out within one section. This possibility is made possible by modular manufacturing coating in which the modules are inserted into each other and secured with a special lock that securely fixes them.
This design feature allows you to make rugs of any size and shape.
The design of the mats is designed in such a way that it allows water to be sent under the covering, and then through special grooves in the covering to end up in the drain channels.
Therefore, when using rugs, you will get rid of puddles that can be favorable conditions for the development of harmful bacteria. Please note that these floor coverings are securely fixed to any floor surface and also protect your feet from slippery and cold stone.
Currently, the market offers a huge selection of a wide variety of rugs of any color, as well as equipment to create underwater pool lighting, which can perfectly suit any interior.
Therefore, if you do not need a rug of one color, then you have the opportunity to place an order, which will be made according to the individual preferences of the customer, with different colors modules.
It is also possible to make a rug that will have an inscription or logo, but this possibility depends on the size of the coating itself.
In addition to the modular anti-slip coating for the pool, there are also special means, which are applied to the floor surface to make it safer and less slippery.
The coating that is created after treating the floor with this product is different crystal structure, which increases the coefficient of friction from five to seven times, while the design and color of the floor is preserved after exposure to the anti-slip coating.
These products are usually manufactured at water based and have safe components, which do not contain harsh chemicals that can adversely affect human health.
Due to their unique composition, such coatings will ensure safety on slippery or wet floor. The service life of such coatings can reach more than two years.
In conclusion of our article, we note that everyone knows that the most important thing in the life of every person is health, especially the health of our children. Therefore, it is always necessary to follow safety precautions when visiting swimming pools, water parks or other similar establishments.
In this regard, anti-slip coatings in such places play an important role and are responsible for the safety of people. Because main problem in such premises there is an increased level of injuries due to wet and slippery floors.
- own production: World of Cleanliness Holding
Anti-slip flooring"Zig-Zag Twist" ensures the safety of people in rooms with high humidity. The product has a relief surface with a cellular structure. The universal color scheme and laconic design allow this type of product to be used to solve various design problems.
Our company installed Zig-Zag Twist coating on such objects as: OJSC "UMMC", Youth Sports School "Yunost", "MetroFitness", "CityFitness" and etc.
In mid-2016, the production company "World of Cleanliness" began production anti-slip coating stamps « Zig-Zag Twist”, developed using an innovative glue-free technique. The technology for manufacturing monolithic products without the use of glue makes it possible to achieve higher strength of products, compared with analogues made in China.
The coating adheres well to the surface and has springy properties, thanks to which it successfully copes with the following functions:
In addition to performing anti-slip functions, the coating protects the floor from mechanical damage, prevents premature wear of linoleum, laminate, tiles and other types decorative finishing. Its scope of application is any premises and open spaces with wet surfaces. The products are widely used as shower flooring , saunas, water parks, locker rooms, indoor and outdoor swimming pools. In everyday life, the product can be used for a bath, balcony or veranda . IN in public places- for the arrangement of any traumatic objects: steps, ramps, playgrounds.
The coating is supplied in rolls, is wear-resistant and nice design. When unfolded, it looks like a track maximum length 10 m. The product does not require special care. Cleaning of the product is carried out using water and ordinary detergents.
Zig-Zag Twist flooring is sold in linear meters, order size must be a multiple of 1.0 per roll.
At the World of Cleanliness company you can order anti-slip roll coatings of various modifications. Installation of tracks is done manually and does not require the use of tools. The product can be used indoors all year round, outdoors - according to the recommended temperature conditions.
To buy a coating for slippery surfaces, leave a request on the website or contact our manager by phone.
