AT last years The Volkhovets brand has become synonymous with uncompromising quality, reliability and stability for the majority of customers. However, the popularity of the brand contributes to the emergence of not only fans, but also unscrupulous followers.
To protect consumers from the risk of purchasing a low-quality fake, the manufacturer has compiled a list of features of branded products.
Package
In order to make sure at the stage of purchase that you do not have analogues, but Volkhovets doors from the manufacturer, check the presence of branded packaging:
There are cutouts on the corners that allow you to determine the shade and model of the block.
The box is equipped with a recognizable company logo.
The package is marked with a coupon, which indicates:
Batch number;
Date of manufacture;
Date of passing the OTC.
On the upper bar of the canvas there are similar data.
A quick look at the canvas
The branded product is painted special method, the engraving is always compatible with the grain direction of the veneer, the pattern is clear. A high-quality canvas should not have the slightest defect.
glass insert
You can also identify a fake by paying attention to the material used for glazing the canvases. The manufacturer completes the structure with high-quality triplex, satin or lacquered glass with a clear expressive pattern. Everything, even the smallest details, is carefully drawn. As for the analogue repeating the Volkhovets door, it is easy to recognize it by vague and fuzzy lines.
Edge characteristics
Carefully examine the edges of the canvas: how evenly they are colored, whether there are sharp color transitions, defects, irregularities. The side parts of the canvases must be made in the same color as the rest of the block, the same applies to the bottom edge. If the lower edge is not processed, there is a high risk of sagging of the sash.
You can also distinguish real Volkhovets doors from analogues by additional security signs. For example, products of the Decanto series are equipped with a branded engraving applied to the edge of the canvas.
Selection of quality interior doors fraught with many "pitfalls". Find out which is better before buying. When changing interior doors in an apartment, most people pay attention primarily to design, color and price. They start to think about quality only when something happens. This is where it turns out that an outstanding design ceases to matter if the door simply does not fulfill its functions, and the decorative surface has peeled off or cracked.
When setting out to choose the best door set, do not prioritize only appearance. A good interior door should be, first of all, of high quality, with guaranteed ideal condition throughout the entire period of operation.
The durability of the door structure is determined by the materials from which it is made, the design and method of decorative finishing. To understand how long new door how durable its design is, whether the price is justified by the performance characteristics, you should deal with their types (subspecies) and features.
All the service life given below refers to high-quality doors, during the manufacture of which the manufacturer fully complied with all technological processes.
Today, the market for interior doors is represented by four main types:
doors with film finish (eco-veneer, PVC film, laminate);
doors with natural veneer veneer;
solid wood doors (pine, oak, ash, alder, beech);
painted doors.
Film doors - most a budget option. Differ in design and type decorative film on: laminated, with pvc trim and eco-veneer doors.
Laminated doors considered to be the least durable products. Their covering is melamine paper. However, there are many examples when, with careful operation, such doors served for 10 years. But under normal conditions, it is necessary to count on a maximum of 5 years, so they are often used as a temporary option. The main advantage is low price, while the doors have a combination of properties that are important for the consumer: light and durable construction; acceptable level of sound insulation provided by honeycomb filling; a variety of colors of finishes, allowing you to choose doors for other interior items. The weak point, traditionally, is the edge of the web.
Doors with pvc coated - more durable analogue of laminated doors. With a similar design, PVC film (due to its strength) allows you to use these doors in a more intensive mode. Also on performance characteristics These doors are also affected by the method of coating: the canvas is wrapped with a film using edgeless technology.
Given the excellent resistance of PVC to abrasion, impact and high humidity, it can be argued that if the doors are not subjected to extreme loads, they will easily last 10 years or more.
Eco veneer doors- the most advanced doors from the category of film. Firstly, they have a more advanced canvas design - it is assembled from separate parts, each of which is wrapped with eco-veneer separately, without edges, before assembly. These are the so-called tsargovye or prefabricated canvases. Secondly, the eco-veneer itself is one of the best innovative finishing materials developed by Japanese technologists. A special composition based on natural resins and wood fibers makes eco-veneer environmentally friendly, durable like PVC film and very similar to the surface of natural wood.
The cost of eco-veneer doors is slightly higher than PVC doors. But to their merits is added an interesting modern design. By installing such doors in an apartment, you can count on a service life of up to 10 years.
Veneered doors- a great option for city apartments. Price range from 4000 r. up to 20000 r. The design is extremely varied. By design, they can be prefabricated, paneled, with triplex glass. The internal filling of such doors is mainly made of solid coniferous wood or LVL timber of increased strength. The veneer is glued onto an MDF substrate - a material with extremely stable dimensions, including changes in humidity and temperature, and most importantly, environmentally friendly. A reasonable question: why is it needed at all? It's all about the constancy of its size, it protects the outer decorative layer of veneer from cracking and peeling.
If you glue the veneer directly on the solid pine frame, with a high probability, when you turn off or turn on the batteries in the apartment, it will become covered with cracks. Well, the most important (and most expensive) in these doors is the veneer itself and its finish. Without going into details, let's say that 0.5 to 2 mm thick veneer, natural or Fine-line, is mainly used. The latter is cheaper, because not made from precious woods. For its production, fast-growing breeds or those familiar to us are used. deciduous trees like poplar, aspen, maple. How to distinguish one from the other, so as not to overpay, we will tell further.
Finishing of veneer is one of the most expensive stages of manufacturing, it includes repeated grinding, impregnation different formulations and several coats of varnish. In general, good veneered doors in their consumer qualities are not inferior to massive ones, and the service life can reach up to 20 years.
Solid wood doors- in this category, all doors made of 100% solid wood. Whatever one may say, but natural wood- the best and most expensive material, but naturalness has back side: the tree is capricious and you need to be able to work with it. In this, humanity has accumulated vast experience. The technologies have been developed for a long time, and have not changed for many years. The main thing is to strictly observe the process parameters at each stage: from the harvesting and drying of raw materials to finishing finished product.
In short, natural wood reacts to any changes in temperature and humidity in the environment and this is the main problem. And as we know, these differences in our apartments occur twice a year. There are two main manifestations: dimensional change (along the fibers many times larger than across) and warpage (the appearance of cracks). To minimize dimensional change, doors are not made of whole piece wood, and from a specially prepared plate of re-glued solid wood. The bottom line is that this plate consists of wooden lamellas (dice) with ideal geometry, which are stacked in several layers with different directions fibers and glued together under pressure. Thus, the layers in the plate do not allow each other to expand.
But as we understand, completely smooth doors are not very interesting in terms of design. Therefore, in modern door designs, we see decorative elements - recesses of various shapes in the door leaf, with a different profile. These elements may differ in shape, depending on the design style. But in any case, the thickness of the door leaf in them is significantly reduced. Accordingly, when, with a change in humidity or temperature, internal stresses reach certain values, the canvas will crack precisely in thin places(the second manifestation of naturalness). To avoid this, a paneled design was invented a long time ago: the door is not made entirely from a stacked array plate, but in parts. All beautiful, with a complex insertion profile in door leaf(panels) are made separately from the strapping (vertical and horizontal transverse). During the assembly process, the panels are fixed in grooves with certain gaps so as not to interfere with their free expansion or contraction.
Thus, the main problems of the array are solved. If the door is made with high quality, then the main thing on which its durability depends is the type of wood and the finish.
Pine doors are distinguished by a soft surface, which gradually loses its original appearance, accumulating defects even from minor impacts. Varnish, mastics, impregnations or wax do not save. This happens quite quickly and perhaps after 5 years of intensive use, their appearance will no longer be so perfect. But there is one plus - you can update paintwork, completely restoring the surface. The most durable pine doors are covered with enamel, its hardness protects the doors much longer. The advantages of natural material, combined with low cost (from 5000 rubles for a varnished canvas) made solid pine doors very popular.
The most durable structures are considered solid wood doors (oak, beech, ash). Their surface is very hard and durable, easily withstands any household impact. Oak doors can stand for 100 years. Such doors were valued at all times. And now their cost starts from 25000r. beyond the standard type block, and up to several hundred thousand - for non-standard doors self made.
painted doors, white, matte, glossy and colored. The main feature of these doors is the surface completely covered with opaque paint. It is interesting that the design of these doors can be absolutely anything, from the simplest smooth panel panels for 3000 rubles. to panel doors in solid beech with hand painted for 25000 r. Basically, enamel-based paints are used, in inexpensive Finnish doors- powder. High-quality paintwork can last quite a long time even with intensive use. In addition, it reliably protects the inner layers of the door leaf from moisture. Thus, even inexpensive models will last at least 10 years. Higher-quality paneled doors, especially from the array, will delight their owners for decades.
When choosing an interior door according to the principle of durability, think about it: can your repair be unchanged for so many years? Doors installed in the past are unlikely to survive the next repair without consequences. And if the canvas can still be carefully removed, then dismantling the box will require remarkable skill, and it is not always possible to reproduce the design in its original form. In addition, the design may not like it or simply not approach the new repair.
Conclusion: quality of doors and other finishing materials in your interior should match each other. Investing in expensive, durable interior doors will be justified if your interior is up to this level.
When you visit an interior door store, you will certainly be offered a lot of options in one or different price segments, they will talk about the merits of the models, persuading you to buy. How to learn to distinguish one species from another? Write down valuable tips.
Within the same species of wood, doors may differ in workmanship.
If the outer coating is at least a little transparent, take a closer look at how the door frame is made and what the plate is made of. Does the surface consist of very small planks and looks like a type-setting parquet? This is an inexpensive array, therefore, the price of such a door should not be too high. quality expensive doors are performed using wide lamellas, sometimes even matched to the pattern and symmetrically, neatly arranged along the canvas.
Sometimes the manufacturer uses cheap, not quite high-quality raw materials. Having previously removed defects from it, splicing it into a microthorn. Under the transparent coating, the microthorn is also visible. As we have already said, a significant share in the price is occupied by finishing surfaces. A significant increase in cost is provided by techniques such as brushing and patination. Before buying, figure out if you need it.
Solid wood doors consist entirely of glued homogeneous wood slabs in several layers. Veneered products are prefabricated structures in which the first layer is veneer, then MDF, after which the base is made of solid pine. Distinguishing veneer from solid is quite simple: look at the top or bottom end of the canvas. Layering, the difference in textures will indicate that you have veneered doors in front of you.
Let's figure it out! Natural veneer is a real cut of a tree, on which its natural pattern is visible, which is unique to this breed. For example: oak veneer, mahogany, anegri, ash, sapele, mahogany, American walnut. Fine-line veneer has no natural pattern. It is made like this: cut sheets of veneer are painted in the desired color, glued together and cut again. It turns out an ordered structure of longitudinal lines of the desired width and color. For production, poplar, aspen, maple and other cheap veneer of fast-growing trees are used. Coatings such as wenge and bleached oak- bright representatives of Fine-line veneer.
The difference between laminated and PVC doors lies in the features of the coating itself and the design of the doors obtained with their help. PVC film is highly stretchable, which allows it to cover any surface, while lamination is paper under the film, which does not tend to stretch. It is technically impossible to cover a relief surface with a laminated film without defects and folds. That's why laminated doors usually have a smooth, even surface without embossed details, decorating elements (glazing beads, baguette) are attached with glue or studs, and recesses and panels are inherent in PVC products.
Distinguishing veneer from eco-veneer is usually easy. Veneer - natural wood covering the frame of the door, and eco-veneer - completely artificial material similar to PVC. The difference is noticeable both visually and tactilely. But there are very high-quality films, and not everything is so simple with them. If it is not at all clear, you must again look at the upper end. The cut of the veneer is thicker than the film, the layers and fibers of natural wood are visible on it.
When buying white doors, you can easily take one type of coating for another. How to distinguish them? most expensive and quality coating- enamel, the application process of which requires a spray booth with separate ventilation, several layers and compositions. To create glossy surfaces, enamel is polished in 5 stages, which is quite difficult and time-consuming. The surface should be smooth, like a mirror. You can check this if you look at the door at an angle. On inexpensive doors, you can see ripples, upon closer inspection, the surface does not look perfect. Sometimes the paint is replaced with a film, you can see this by looking at the upper end of the canvas.
To choose good interior doors, it is not enough to learn to recognize their types, each buyer must be able to distinguish high-quality door designs from low-quality ones. Below 15 signs are not quality doors which you should be aware of.
The market for interior doors is full of offers. Having decided on the type of coating and the material of manufacture, one must be able to determine their quality. Unfortunately, door structures with low operational and consumer characteristics are quite common. When inspecting the door, you can paint all the charms of the door set and design, while hiding real flaws. Therefore, be on the alert! Here the main signs of low-quality interior doors, which will help to recognize the "fake".
Poor-quality veneered doors give the following disadvantages:
Defects finish coat veneer and poor sanding. Between each layer of varnish there is an intermediate grinding. If this is not done, the surface will not be smooth enough, bubbles, shells, depressions, pores will be noticeable on the varnish.
Poor quality varnish. If the manufacturer saves and uses cheap varnish, turbidity, smudges or an extraneous chemical smell are possible.
Veneer defects - uneven toning, spots, color difference between elements, poorly selected pattern.
Edge defects. Veneer on front surface and on the edge it should visually be one whole, as if we have a solid door in front of us. Gaps or transitions are excluded.
Assembly defects. Pay attention to the gaps in the attachment points of the panels, figured baguette, glazing beads, glass - everything should be perfect.
Mechanical defects on the sample - chips, scratches, cracks in the veneer, traces of restoration. All this may indicate that the veneer is fragile or poorly glued.
You are offered low-quality solid wood doors if:
There is a violation of the geometry. Measure the diagonal with a tape measure - the difference should be no more than 2 mm, check from the end for a bend in the blade with a screw.
Surface defects - poorly polished, there is hairiness, irregularities, fibers stick out, chips in the corners. For a varnished surface, all of the above about veneer is true.
There are defects in the array itself - cracks, gaps between the lamellas, lamellas spliced onto the microthorn on the surface.
Signs of poor quality painted door structures are:
Assembly flaws. Due to poor assembly, the elements of the canvas may move away from each other. On painted doors, this will be especially noticeable, visually similar to deep cracks in the enamel.
The edge is different from front side. It should be one with the rest of the coating. If there is any doubt - perhaps it is generally a film.
Poor-quality painting: unpainted areas, painted over chips and cracks, a thin layer of paintwork, there are smudges of paint, dust is painted over in the corners.
Do not buy film doors, which:
A film or edge is already peeling off on the surface of the sample in the store.
Elements moving relative to each other (typical for prefabricated canvases and indicates poor assembly, such a canvas may sag).
Defects in the junction of elements - large gaps, crooked seams, glue smudges, there is no sealant or, conversely, its excess protrudes beyond the boundaries.
When pressed, the surface of the canvas bends, which indicates the use of thin MDF and the hollowness of the elements.
Knowing this information, even at the stage of choosing an interior door, you can dismiss products that are not worthy of attention. A few important recommendations will help with this:
ask for a sectional fragment to understand what the canvas is made of;
inspect the upper (lower) end;
ask the seller what kind of glass is included in this package, how it is fixed;
check the door for rattling of the elements, the door leaf must be a monolith;
There are two types of exposure to moisture. When the air humidity changes, all wooden crafts will strive for balance with environment absorbing or releasing moisture. At the same time, their dimensions change, but as we already know, this is almost imperceptible for high-quality doors. The second type of impact is when the door is installed in a very wet room, for example, in the bathroom, and sometimes water literally flows down the surface of the door, gathering into droplets and streams. Let's talk about this case.
The surface of most interior doors (lacquer, paint or film) is practically impervious to moisture. Therefore, the most vulnerable will be joints, gaps, edges, raw areas, and all places where water can penetrate the web. Surely everyone saw how laminated floors swell (in which the lock is not treated with a special compound), if the spilled water is not quickly removed.
What kind of doors can be put in the bathroom? The array is usually completely covered with varnish or paint, so it is not scary. In veneer, the edge and surface are varnished, in connection with this, if its layers are not broken anywhere, then water is not terrible. But both are better to wipe with a dry cloth, water, as you know, will find a way. Films also do not pass, but they have weak points - coating joints. Therefore, manufacturers are trying to get rid of edges and seams. In the doors, the eco-veneer is first wrapped around each element of the canvas, and then assembled, leaving the seams inside the canvas. PVC doors wrap entirely. At laminated sheets there are edges - they are the most vulnerable. Doors painted with enamel are considered the most stable.
The interroom door consists not only of a cloth. If you are offered an attractive price for a door leaf, it is important to know that the purchase of components can take another 50% of these funds. To the choice of fittings and moldings (boxes, platbands, additional and decorative elements, capitals, cornices, etc.) should be approached as responsibly as the choice of the canvas itself.
Almost all manufacturers use the same glass, however, there are nuances:
glass elements thinner than 4 mm are quite fragile, it is better not to take doors with their presence;
the larger the glass area, the worse the sound insulation;
triplex is completely safe so that they do not talk about it;
spots on frosted glass- this is a marriage;
glass dangles and does not adhere well to the structure - this is a marriage;
tempered glass is used only in expensive models, but not in doors for 7000 rubles;
90% of stained glass windows - imitation made with stickers;
real diamond engraving or sandblasting drawing is applied only on one side of the glass and it is better to put the door in the corridor on this side.
Often unusual beautiful glasses are used by sellers to justify the added cost. Such glasses are more expensive than usual, but you need to understand what exactly you pay for and what you get.
Features of choosing high-quality fittings for an interior door are as follows:
Brass hinges are preferable to steel ones. Collapsible is better than non-removable.
It is better to buy silent latches, where the plastic tongue neutralizes the impact on the answer when closing, or magnetic ones - they are quiet and safe.
When choosing handles, you should pay attention to the mechanical part and the quality of the coating. After all, the main irritating factors during operation are just the sagging of the handle (due to a weak spring) and abrasion of the coating. To avoid this, purchase fittings from trusted manufacturers or find the fittings you like in the store, on an installed sample, and see how it behaves.
There are two types of moldings for doors: regular and telescopic. The second option is more expensive and easier to install. In addition, its acquisition makes sense in the following situations:
if the thickness of the wall is 1-2 centimeters greater than the width of the box, telescopic moldings allow you to close the difference, saving on additional elements;
imperfect, curved walls and the box is level, in this case the L-shaped protrusion on the casing will compensate for the curvature.
Be sure to pay attention to the thickness of the box when buying inexpensive interior doors. Often the manufacturer, wanting to save money, makes it very thin, which can have negative consequences.
After reading this article, you have definitely made a conclusion: in order to correctly choose a door, it is not enough to be guided by design and cost. At a minimum, you should be able to independently determine what kind of product is in front of you and what quality it is. It is important to understand exactly what consumer properties of doors you need, and what can be neglected in order to save money.
But what if there is neither time nor desire to understand all the nuances yourself?
You probably immediately thought about the reviews. But this also takes time, and most importantly, who writes them, a real person or a representative of the manufacturer's company? And if the information from the review is not confirmed, who will answer?
The only way out is to find a specialist who will take full responsibility for the result. The best option are full cycle companies that:
give a guarantee for the doors and installation, are responsible under the contract for the deadlines;
offer a wide range of doors and only time-tested manufacturers with guaranteed quality;
they advise and help with the choice, choosing the really best option for you - after all, it is the reviews of grateful customers that create a reputation;
are responsible under the contract for measuring doorways and the correct order of products ( the right dimensions and the necessary equipment - nothing more);
are responsible for the safety of products during delivery, lifting to the floor, up to the completion of installation at your facility;
prescribe the full cost of products and works in the contract, taking into account all the nuances, and this cost will remain unchanged throughout the entire cooperation.
A reasonable question is why such a company cannot sell low-quality doors?
We answer: maybe. But doing this is extremely unprofitable for her, because. dismantling of defective doors, delivery back to the warehouse, ordering new ones, delivery back to the client, re-installation - all this will quickly nullify the profit from the order. That is why the careful selection of partner factories becomes a vital event. By the way, there are only 20 of them in our store. We selected these brands among the masses of others for their impeccable quality. .
Having collected this useful information, we wanted to make it easier for you to choose high-quality and durable interior doors. We will make the choice even easier and more exciting if you contact our specialists! You can buy interior doors in our store with delivery and installation in St. Petersburg and delivery by transport companies in Russia.
The buyer, based on his ability to pay, often opts for structures made of MDF, chipboard, plastic or glass, completely unaware of the features of these materials, and, as a result, is disappointed. It turns out that some doors do not tolerate moisture, others do not like sunlight, others let noise through. You can avoid senseless spending if you know the main characteristics of each material.
A wooden door is a classic, proven choice. It is strong, durable, with a beautiful structure. The environmental friendliness of this material does not raise questions. The fashion for a simple wooden door has led to the emergence of unpretentious door blocks without finishing, which will fit better into any interior. However, the tree can be different:
Types of interior doors made of wood-fiber or wood-compressed boards (MDF and chipboard) are used everywhere. Since the raw materials for such boards are made from cheap by-products, these materials have become ubiquitous. Doors made of chipboard and fiberboard have more than mediocre performance mechanical strength. Their overwhelming advantage is the price. You can also note good biostability, acceptable indicators of heat and sound insulation. The main disadvantage: the presence of a volatile substance in the composition of the adhesive, the vapors of which pose a certain threat to health. Another significant drawback is low moisture resistance. The main thing is not to choose such interior doors for the bathroom - soon they will simply swell and exfoliate. Among the shortcomings, among other things, we can mention the complexity of installation (the screws in the canvas do not hold firmly, it is not easy to drill a hole). However, as a budget option, such a choice of material for interior doors has a right to exist. Especially considering the fact that you can choose laminate or veneer as the coating material (which is better), and the characteristics of such interior doors will change somewhat. 
Aluminum interior doors are a common choice when creating the interiors of shops, pharmacies, salons and others. public places, however, there are many stylish options for home. Usually these are models combined with glass. These types of doors are not afraid of moisture or temperature surprises, they are strong, light and durable. There is only one drawback: the aluminum door is covered with a special film, which is not at all difficult to damage, and then it is problematic to replace. 
Plastic interior door - quite modern choice. We note right away that the release of harmful substances by it is not as dangerous as it is commonly believed. In care, plastic doors are completely unpretentious - you can remove any dirt without any special means. PVC doors retain color for a long time (what color they will be - the decision of the buyer, but the manufacturer offers a huge range of available shades), are not afraid of temperature changes, have excellent sound insulation, are resistant to mechanical damage, boast a wide model range. it good choice in terms of economy and practicality. As an option - choose foamed PVC based modern technologies. It has a cellular structure in which air is retained, thanks to which sound and heat insulation is better. Most often, interior doors made of foamed PVC are installed in public places. 
Doors with honeycomb fillers (Canadian or Masonite) - these types of doors are often found in hairdressing salons, shops. It's all about their more than democratic, one might say "ridiculous" price. The canvas is made from a lightweight frame, and the hollow spaces inside are filled with cardboard cells (similar to honeycombs). Such doors are both with double-glazed windows, and deaf, both laminated and primed. They are lightweight and quite practical. Yes, they have little strength, but for places where there are no rough physical effects on the canvas, this is quite suitable choice. True, Canadian doors do not tolerate moisture and do not save well from noise. 
A special place among interior doors is given to glass doors. Transparent glass gives the doors an incredible style, increases the volume of the room. This is the choice for lovers modern style studio apartments with a united, and, at the same time, strictly zoned space. There are transparent and frosted doors, mirror models and tinted with a pattern, one-piece, with inserts of rhinestones and metal. Which one is better - everyone decides for himself. Glass is a fragile material, and this is a clear disadvantage of such doors. If there are children in the apartment, it is better to refrain from buying. Although you can choose a fairly strong tempered glass or triplex - a canvas covered with a special film that does not allow the glass to break into fragments when damaged. This also applies to doors with glass inserts. If the doors are installed professionally and maintained correctly, they will remain an exquisite decoration of your interior for a long time. 
In conclusion, consider the options for surface coverage:
Natural veneer is a thin cut of a certain type of wood (very often valuable), which is used for decorative surface finishing of interior doors. They should be chosen by lovers of wooden doors who are not ready to bear the high costs. Veneered doors are highly durable, resistant to external influences, durability, restoration prospects, high rates of noise and heat insulation. At the same time, interior veneered doors have a very decent appearance and uniform color. Of course, one must understand that this characteristic of veneered products is only relative, because, after all, their main qualities depend on the internal content. Veneered doors are made from different materials– from timber to honeycomb filler, and different technologies. Perhaps this is their main disadvantage- the inability to check for sure the quality of the internal material, and this significantly complicates the choice. 
Interior laminated doors are the most popular choice for inexpensive interior. Lamination occurs by heating and gluing paper or cellulose fiber impregnated with synthetic resins onto the door. At the same time, a thin non-combustible protective film of polymers remains on the frame. Outwardly, such a coating does not differ from veneer, so the laminate film, for all its subtlety, reproduces the texture and color of real wood. Unfortunately, the edges of the laminate periodically crumble when mechanical influences, and such a door will not be restored. But lamination adds moisture resistance to the door material, makes it easier to maintain and better in other respects. 
What material for an interior door, ultimately, to choose depends on the characteristics of its operation, the financial capabilities of the buyer and his personal taste preferences, but the decision must be practical and balanced.
The Morelli Twice Tilt & Slide (Compack) system is a revolutionary system that reduces requirements for door opening space and maximizes free space. The system combines the magic of rotating a roto-web with the functionality of a compact book. The door effectively folds in half and, having made a graceful turn, will silently take its place along the wall. The absence of a heavy guide will create a floating effect. The safety of the Morelli Twice (Compak) sliding system has been verified in numerous tests.
Benefits of the Morelli Twice Sliding and Turning System
1. The space in the door area can be used more.
2. No problems with collisions with neighboring doors.
3. The door folds along the wall, reducing the space occupied by 50%.
4. Turns into a single structure when closed, just like a normal door.
5. The door opens smoothly and silently due to the lack of rollers. The smoothness of opening does not change with time of use.
6. Does not require alteration of walls.
The Morelli TWICE Tilt&Slide Door Opening System is a high-tech product that breaks new ground in design interior spaces and increases free space even in small ones. Morelli TWICE is a constructive alternative to all types of doors.
Attention, the installation of a TWICE swing-out door is difficult for untrained installers!
Opening options for Twice-Compack door
Factories Profil Doors, Framir (Fineza Puerta) and Dariano produce kits prepared for installation with this mechanism with all the necessary notches and panels.
swivel sliding door Compack Profile Doors
The range of doors that are equipped with folding opening is represented by the Profil Doors Z, D and VG collection. The door kit Compak Profile Dors is supplied with all cutouts.
Sliding door Compack Framir
The Framir factory introduces the Morelli Twice system for its products. The order of this system has become especially profitable in the case of an order with the Framir factory doors, as well as with the Fineza Puerta and Dolce Porte collections, represented on the Russian door market by this factory, since it is possible to order these doors from the factory with all the cuts.
a set of non-standard height up to 2300 mm has an extra charge of +15%, over 2300 mm +50%
Twice Sliding Door Dariano
It is a revolutionary system that reduces space requirements for the opening of the door and maximizes the available space. The system combines the rotation of a roto-blade with the functionality of a compact "book". The door effectively folds in half and, having made a graceful turn, will silently take its place along the wall. The absence of a heavy guide will create a floating effect. The safety of the TWICE sliding system has been proven in numerous tests.
Possible order double doors!
|
Twice Dariano Door Kit: - Twice folding mechanism; - accessories for folding mechanism: magnetic lock and a set of wraps; - compack box set; - all the cut-offs necessary for installation, made in the factory; Additionally purchased: - 2 canvases from the list of allowed for this system (Calculated as 1 door leaf + 20%); - extensions and platbands for finishing the opening of the Dakota type (on request); - a regular pen (on request). |
Twice Status Sliding Door
