Stairs. Entry group. Materials. Doors. Locks. Design

Disgustingly creaking door hinges annoy everyone. They can creak for various reasons. This can be both the presence of rust on their surface, and the general wear of parts. Often, to get rid of the annoying squeak, it is enough just to lubricate the hinges, and for this it is not at all necessary to remove the door leaf. There are ways that allow you to do this without resorting to radical methods.

If the door creaks in the room: what to do and why it happens

If the interior or front door in the apartment began to creak, then there are reasons for this. As a rule, this happens when the door structure is in motion, that is, it opens or closes.

To find out exactly what exactly creaks: the hinges or the canvas itself, you need to slowly move the door back and forth, holding tightly to the handle and listening to the sounds made.

Why does the door creak and how to eliminate these reasons:

1. There are errors when hanging the door leaf - for example, the hinges are not installed correctly. To solve such a problem, you need to reinstall the door or call the masters who will quickly and efficiently perform this work.
2. The door lining touches the hinges - to eliminate this reason, you just need to remove the lining and make it the right size.
3. There are not enough balls in the door hinges - in this case they need to be put in the necessary places.
4. The hinges are simply loosely fixed - it is worth twisting them well.
5. The sagging of the canvas has begun - such a problem can affect, first of all, a plastic door. To remove it, you need to adjust the top or bottom loop, depending on the area of ​​sagging.
6. The ends of the door leaf touch the platbands - in this case, the mounting grooves should be deepened.
7. The fasteners of the door structure have not been lubricated for a long time - here it is enough just to perform this action;
8. Rust has appeared - this problem mainly concerns the iron door. Here it is necessary to clean the hinges from plaque and only then lubricate them. If corrosion has managed to deeply eat into the material, then the loops will have to be replaced.
9. The lubricating composition is incorrectly selected - in this case, you need to remove the old agent and apply a new one.
10. The hinges have already become very loose and their service life has come to an end - here it remains just to replace them.

This is what the main causes of the terrible creaking of the door look like. But basically the whole thing is the lack of lubricant on the hinges. Therefore, you should figure out what is better to lubricate them.

If the door creaks due to unlubricated hinges, the right lubricant will help solve the problem.

The better to lubricate the hinges of interior door panels:

• Oil for sewing machines;
• Machine oil, which is used for a car engine;
• diesel oil;
• Ciatim - perfectly removes not only creaking, but also protects parts from corrosion and the effects of aggressive components;
• Special tool WD-40 - in addition to the usual lubricant, this substance fights rust well, and you can buy it at any auto parts store.

Do not lubricate a creaky door with vegetable or olive oil. This gives, firstly, a short-term effect, and secondly, it causes the formation of excess plaque on the fittings, and as a result it will have to be changed.

An excellent home way to lubricate the door is to use the lead of a “soft” pencil. It is very simple to do this - just put the stylus on the hinges and move the door a little in different directions. The material will crumble and fall on all the loops.

If the front door of the house creaks, then it is better to lubricate it with substances such as:

• Litol - this lubricant is not afraid of frost and can withstand a temperature range from -40 to +120 degrees;
• Solidol is a fairly cheap remedy that can act in temperature conditions from -35 to +65 degrees.

If the front door leads to a vestibule or entrance, where the positive temperature is constantly maintained, then you can use ordinary engine oil or WD-40.

So that the hinges do not creak, they must be coated with a special lubricant. Moreover, sometimes it needs to be done without removing the door leaf from the hinges.

In the case of a plastic door, it looks like this:

• A syringe is taken, which is filled with oil for lubrication and the substance is applied to the fittings;
• If a pencil lead is used instead of lubrication, then the door needs to be slightly raised so that the slots into which the agent is poured are visible.

If a plastic door leads to a balcony, then it is necessary to start lubrication from its side. The door must be open.

Instructions: how to lubricate the hinges of an iron door

A creaking iron or metal door must be lubricated. If the parts of the door structure are non-separable, then you will have to do this without removing the structure.

The metal door is lubricated like this:

• The door leaf opens wide open;
• Then it rises a little (for these purposes, you need to put something under the end of the door, for example, a thick file);
• After that, old grease and accumulated dirt are removed from the fittings;
• Then a lubricant can be applied with a cotton swab, brush, syringe or using an oiler with a nozzle;
• After completing all the procedures, the door is removed from the "lever" and moves several times in different directions so that the product is evenly distributed over the hinges;
• Excess material should be removed with a dry cloth.

During lubrication, more substance should be applied to the upper hinges, since the main load during the operation of the door falls on them.

If the hinges are a hidden mechanism, then you need to find all its rotary parts and lubricate. Sometimes there are special holes for pouring oil.

Tips: how to lubricate door hinges without removing the door (video)

The main cause of a door creaking in a room is the lack of lubrication on the door hinges. Naturally, to remove this problem, it is necessary to lubricate them. In order not to remove the canvas, you can use a simpler method and do all the necessary actions with the help of auxiliary devices. The main thing is not to forget about security measures.

Attention, only TODAY!