Now the market offers a large number of high-quality entrance doors manufactured at domestic factories or imported ones. The front door is both your safety and protection from outside noise and heat loss. Its installation cannot be considered complete if the slopes for the entrance doors are not completed. . After all, the front door plus slopes for it, the so-called entrance group, is also an integral part of the interior, which cannot be ignored. Some people invite specialists to make slopes, but if you are an enthusiast, then you will be interested to know how to install slopes on the front door.
If you ask the masters what to make slopes on, then you will most likely be answered that the most common methods are:
Also, door slopes are often made of MDF and other finishing materials, but they will be discussed below.
The attractiveness of all these methods lies in the relative cheapness and ease of installation, every tinkerer can do the work himself. However, if you decide to install slopes for front doors with your own hands, then you should not approach this issue thoughtlessly.
You need to start with which doors you need slopes for, whether they will be in a private house or in. If they are installed in an apartment, then they do not have direct contact with the street and any finishing materials are suitable for them. But for a private house, drywall slopes will not be the best option, since the contact of the door with cold outside air inevitably leads to the formation of condensate, and it has a destructive effect on drywall.
For a private house, it would be preferable to make slopes with plaster, although it is imperative to pre-treat the entrance door openings with a primer against the fungus, otherwise it will inevitably settle here. Let us consider in more detail the features and existing methods for performing slopes.
Read how to make slopes with your own hands on plastic windows. You will also learn how to insulate slopes.
In order to carry out the slopes of the front door, tools and materials will be required qualitatively. Choose only quality products, as this is the key to effective work. To make the slopes of the front door with your own hands, you will need:
In order to perform well, you need to use beacons, which are installed at intervals along the length of each end on a well-prepared and primed surface. Beacons are attached with a solution, it is better to use plaster, which is easy to set. When installing beacons, use a level to adjust their location in the same plane.
When the beacons hold tight, proceed to plastering with a sand-cement mixture, which is prepared in a ratio of one to four. It is convenient to mix the mixture of sand and cement with a drill with a nozzle. Throw the solution with a trowel and level with a wide spatula along the beacons. After a day, the solution should dry and then the starting putty is applied to the slope over the plaster. Another day is given to dry, and the surface is treated with a finishing putty. After another day, the slopes are polished with sandpaper and they are painted.
Finishing door slopes with plaster photo
It is used when it is necessary to level the surface and correct significant irregularities. In addition, the material is very strong and durable, easy to install. The only drawback is poor moisture resistance, so you should choose water-repellent models.
The necessary tools and materials to make the slopes of the front door with your own hands using drywall:
Finishing the slopes of the entrance doors with drywall photo
The slopes on the front door of drywall are made as follows:
The better the plastered slopes, read the article:
Have you chosen plastic slopes? Read how to install them, follow the link to find detailed instructions, explaining photos and videos.
Looking for where to order plastic windows? "" or an article about where to order plastic windows - a review especially for our readers.
Thinking about how best to make slopes on the front door , using laminate seems like a great option. After all, you only need to install it correctly and do not need any further finishing. In fact, there are some difficulties depending on the chosen method of finishing with a laminate. There are two ways:
It is better to level the surface, but often, if the width of the laminate is enough for slopes, then you can do without it. It is necessary to cut the plates of a suitable size and fasten them to liquid nails or to mounting foam. Laminate strips are joined in length, fixed and the space between the wall and the laminate is filled with mounting foam. Seams are treated with colorless silicone sealants. Platbands are installed.
Finishing the slopes of the front door with a laminate photo
It is good to use it when they want to insulate door slopes. For this, a heater is used, for example, mineral wool, which is placed between the wall and the frame. In order to use the frame mount, you must perform the following sequence of steps:
Watch the video, how to make slopes on the front door laminate
